• 0
3M™ Fiberglass Matting Adhesive, 08277, 400 mL Cartridge, 6 per case

3M™ Fiberglass Matting Adhesive, 08277, 400 mL Cartridge, 6 per case

3M™ Fiberglass Matting Adhesive is a low viscosity two-part urethane used to saturate fiberglass cloth or mat when preparing backup patches. Our adhesive may also be used for filling cracks, channels and areas restricting the application of an adhesive bead.
Price: $571.58

(Case of 6 Each)

  • $571.58
    • Case of 6 - $571.58
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      10.7 lbs
    • SKU
      7000119846
    • UPC/ISBN
      00051135082775
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000119846
  • 3M ID
    60455050298
  • UPC
    00-51135-08277-5
  • Product Formal Name
    3M™ Fiberglass Matting Adhesive, 08277, 400 mL Cartridge, 6 per case
  • Case Unit
    Case of 6
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Volume
    400 mL
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/761724O/technical-data-sheet-3mtm-fiberglass-matting-adhesive-08277.pdf&fn=TDS_08277.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8mSl8tGlv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    8.2
  • Box Width (in)
    6.3
  • Box Height (in)
    9.9
  • Bullets
    • Bullet 1
      - A high performance low viscosity two component urethane adhesive
      - Adhesive is used to saturate fiberglass cloth when preparing backup patches
      - Secondary use includes filling cracks, channels and areas restricting the application of an adhesive bead
      - Use with 3M™ Performance Manual Applicator, PN 08284 and 3M™ Static Mixing Nozzle, PN 08193
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3506105000
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      004620
    • NMFC Class
      060.0
    • NMFC Sub
      02
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      201°F/94°C
  • SKU
    7000119846
  • UPC/ISBN
    00051135082775

Due to its excellent absorption into fiberglass mat or cloth, 3M™ Fiberglass Matting Adhesive is used to saturate fiberglass cloth and/or mat when creating backup patches for Sheet Molded Compound (SMC) and Fiber Reinforced Polyester (FRP). Examples of FRP include Fiberglass and Metton® panels. If bonding reinforcement patches to flexible plastics or Metton® use 3M™ Polyolefin Adhesion Promoter, part number 05907 before applying the patch.Typical Performance PropertiesThe following times have been determined with ambient air temperature and substrate temperature at 73°F (23°C) and are considered typical values. Our fiberglass matting adhesive has a mix nozzle dwell time of 9.5 minutes, work time of 10 minutes, sanding time of 45 minutes and cure time of 45 minutes.Bringing Science to the Art of Auto Body Repair3M is well known among collision repair professionals and others who are committed to helping you restore the beauty and value to your cars and boats. 3M™ Fiberglass Matting Adhesive is another way that 3M applies science to life – and helps you rediscover the excitement of the vehicles you own.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.