3M™ Wind Epoxy Filler W3120, 200 mL, 6 Cartridges/Box
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100027175
-
3M ID70006668068
-
UPC00-48011-66174-2
-
Product Formal Name3M™ Wind Epoxy Filler W3120, 200 mL, 6 Cartridges/Box
-
Case UnitCase of 6
-
Unit of MeasureKit
-
Product IDW3120
-
Estimated Lead Time2
-
Volume200 mL
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/638128O/3m-wind-epoxy-filler-w3120-10-min-technical-data-sheet.pdf&fn=WindEpoxyFillerW3120_DMR_9800874_R1.pdf
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8mG4xmGlv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)12
-
Box Width (in)9.6
-
Box Height (in)5.3
- Bullets
-
Bullet 1- Finish and smooth the wind blade surface and leading edge during the manufacturing process
- repair minor damage on the wind blade surface quickly and reliably during maintenance operations either on the ground or up tower
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506105000
-
UNSPSC Code32000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
NMFC Item149610
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
-
International Maritime OrganizationNOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
-
Flashpoint TransportNo Flash Point
-
-
SKU7100027175
-
UPC/ISBN00048011661742
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.