Scotch-Brite™ Satin Pleated Buff Wheel, 14 in x 2 in x 1-1/4 in 4A FIN, 180 per case

Scotch-Brite™ Satin Pleated Buff Wheel has pleated abrasive flaps designed to produce a soft satin finish on most metals.
Price: $10836.91

(Case of 180 Each)

  • $10836.91
  • Case of 180 - $10836.91
Qty:  
Free shipping
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      370 lbs
    • SKU
      7010329306
    • UPC/ISBN
      00048011601786
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7010329306
  • 3M ID
    61500291135
  • UPC
    00-48011-60178-6
  • Product Formal Name
    Scotch-Brite™ Satin Pleated Buff Wheel, 14 in x 2 in x 1-1/4 in 4A FIN, 180 per case
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 180
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Grit/Micron
    Fine
  • Size
    14 in x 2 in x 1-1/4 in
  • Inventory Status Code
    S
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxm9m82Snv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Wheel
  • Return Policy
    No Return
  • Width
    14 in
  • Length
    2 in
  • Box Length (in)
    1.2
  • Box Width (in)
    1.2
  • Box Height (in)
    1.2
  • Bullets
    • Bullet 1
      - pleated design helps reduce the potential for streaks or blemishes on the workpiece
      - pleated design Acts as a ventilation system, helping the Abrasive run cool
      - Available in fine (FIN) and very fine (VFN) grades to produce a soft, satin Finish on most metals
      - Minimizes need for cleaning chemicals and pastes
      - open web is load resistant to minimize clogging and prolong Abrasive service life
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      149240
    • NMFC Class
      092.5
    • NMFC Sub
      07
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010329306
  • UPC/ISBN
    00048011601786

Advantages of a Pleated DesignScotch-Brite™ Satin Pleated Buff Wheel was designed with pleated nonwoven flaps attached to a steel or fiberglass core in a wave-like pattern. It can lightly finish, deburr and blend on most metals. The benefits of a pleated design are twofold. First, the spacing between the pleated layers ventilates the abrasive as it finishes. Air circulates between the layers, helping the abrasive run cool. Second, the wavy pattern decreases the potential for streaks. Other stacked discs have a slight gap between them, but the springy layers of pleated abrasive curve and undulate to ensue no gaps. Lines or traces that may result from stacked discs are eliminated.The fibrous layers on the wheel respond to surface irregularities and conform to contours – to help maintain part geometry. Available in fine (FIN) or very fine (VFN) grades, the Scotch-Brite™ Satin Pleated Buff Wheel will deliver a fine satin finish on most metals and is commonly used on builders hardware, such as faucet fixtures.The Many Benefits of Open Web AbrasivesNonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral.Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite™ products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes and replacing wire brushes that can break off and cause injury. From aesthetic finishing to deburring and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.