3M™ Trizact™ Cloth Band 237AA, .531 in x 1 in A80 X-weight, 500 per case

3M™ Trizact™ Cloth Band 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.
Price: $793.97

(Case of 500 Each)

Estimated Lead Time is 15 working days.
  • $793.97
  • Case of 500 - $793.97
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      1.721 lbs
    • SKU
      7010361980
    • UPC/ISBN
      00051125869102
  • Lead Time
    15
  • Manufacturer
    3M
  • SAP
    7010361980
  • 3M ID
    60440297087
  • UPC
    00-51125-86910-2
  • Product Formal Name
    3M™ Trizact™ Cloth Band 237AA, .531 in x 1 in A80 X-weight, 500 per case
  • Brand
    Trizact
  • Case Unit
    Case of 500
  • Unit of Measure
    Each
  • Product ID
    237AA
  • Part Number
    237AA
  • Estimated Lead Time
    15
  • Grit/Micron
    80
  • Size
    531 in x 1 in
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/1253904O/3m-abrasives-for-hand-tools-leaflet-high-res.pdf&fn=61-5002-8415-5_highres_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxmS5xmBPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    531 in
  • Length
    1 in
  • Box Length (in)
    6.4
  • Box Width (in)
    6.4
  • Box Height (in)
    6.5
  • Bullets
    • Bullet 1
      - self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
      - flexible backing for consistent Finish over contours
      - Three-dimensional design enables very consistent finishes throughout the Abrasive life in robotic applications
      - for intermediate finishing and fine polishing prior to plating or buffing
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805100000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010361980
  • UPC/ISBN
    00051125869102

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.