Scotch-Brite™ Roloc™+ Clean and Strip XT Pro Disc, TR+, 4 in x 1/2 in, S XCS, 10 per case
Scotch-Brite™ Roloc™+ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web. It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibers are highly conformable, resist chunking and loading, and perform well on edges.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100173794
-
3M ID61500303393
-
UPC06-38060-21552-4
-
Product Formal NameScotch-Brite™ Roloc™+ Clean and Strip XT Pro Disc, TR+, 4 in x 1/2 in, S XCS, 10 per case
-
BrandRoloc, Scotch-Brite
-
Case UnitCase of 10
-
Unit of MeasureEach
-
Estimated Lead Time2
-
Grit/MicronExtra Coarse
-
Size4 in x 1/2 in
-
Diameter4 in
-
ColorPurple
-
Inventory Status CodeS
-
Country of OriginUSA
-
Product FormDisc
-
Return PolicyNo Return
-
Width4 in
-
Length1/2 in
-
Box Length (in)8.7
-
Box Width (in)8.5
-
Box Height (in)4.8
- Bullets
-
Bullet 1- Quickly removes rust, paint, mill scale and coatings from metal
- High-strength fiber resists chunking and performs well on edges
- High conformability provides a larger contact patch for faster removal rates
- Silicon carbide mineral cuts aggressively and leaves a fine finish
- Resists loading for consistent cutting action
- High speed rating, low vibration and low spark
- Roloc™+ attachment system makes disc changes easy
- Requires use of Roloc™+ backup pad (sold separately)
- Ideal for applications where running a disc on its edge is necessary
-
-
SKU7100173794
-
UPC/ISBN00638060215524
Take Advantage of High ConformabilityWith its reengineered fiber type, the Scotch-Brite™ Roloc™+ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.In addition to its high conformability, the Scotch-Brite™ Roloc™+ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your disc sander or die grinder with confidence.Spongy Web, Sharp MineralTo engineer our Scotch-Brite™ Roloc™+ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive.The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.Roloc™+ For Strong, Easy AttachmentThis disc comes with the added benefit of a Roloc™+ attachment. Operators can quickly and swiftly attach the wheel to a Roloc™+ backup pad (sold separately) that connects to the power tool. The Roloc™+ button is attached all the way through the disc, increasing strength and user-friendliness. This allows the disc to be run on its edge for cleaning corner welds and other hard-to-reach areas.ApplicationsRust removalPaint removalMill scale removalCoating removalAdhesive removalSurface preparationSeam sealer removal
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.