• 0
Standard Abrasives™ Surface Conditioning RC Disc, 849816, 7 in x 7/8 in Hole VFN, 10 per inner 100 per case

Standard Abrasives™ Surface Conditioning RC Disc, 849816, 7 in x 7/8 in Hole VFN, 10 per inner 100 per case

Our Standard Abrasives™ Surface Conditioning RC Disc combines edge durability and flexibility with high initial and extended cut rate to create a great all-around disc pad for deburring, blending, cleaning and finishing of composites or other soft metals.
Standard Abrasives
Price: $693.34

(Case of 100 Each)

Estimated Lead Time is 10 working days.
  • $693.34
    • Case of 100 - $693.34
Qty:  
OR
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      13.8 lbs
    • SKU
      7010368501
    • UPC/ISBN
      00051115358043
  • Industry
    IB
  • Lead Time
    10
  • Manufacturer
    3M
  • SAP
    7010368501
  • 3M ID
    66000034042
  • UPC
    00-51115-35804-3
  • Product Formal Name
    Standard Abrasives™ Surface Conditioning RC Disc, 849816, 7 in x 7/8 in Hole VFN, 10 per inner 100 per case
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 100
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 10
  • Estimated Lead Time
    10
  • Grit/Micron
    Very Fine
  • Size
    7 in
  • Diameter
    7 in
  • Color
    Blue
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/563940O/standard-abrasives-quick-change-discs-for-disc-sanders.pdf&fn=61-5002-8236-5_2014_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYtvo8m9Ov70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    7 in
  • Box Length (in)
    18.4
  • Box Width (in)
    18.4
  • Box Height (in)
    6.6
  • Bullets
    • Bullet 1
      - High edge durability and flexibility
      - Designed for blending, coating removal, finishing, and light deburring
      - Aluminum Oxide on RC material provides good initial and extended cut rate
      - Best material for general use and average pressure usage
      - Most efficient on flat surfaces made of composites or soft metals
      - Available with Hook and Loop attachment
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010368501
  • UPC/ISBN
    00051115358043

Tough Woven FabricStandard Abrasives™ Surface Conditioning Discs provide a more compact structure of non-woven fibers than Buff & Blend products. Our RC disc has a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the disc and allows for extended use on ferrous materials where final finishing is important. This material is great for general use, delivering a solid mix of durability, flexibility, and cut rate.Mixed MaterialsOur Standard Abrasives™ Surface Conditioning RC Discs are made of a tough, but flexible nylon mesh that fits any contoured surface. This mesh is also laced with aluminum oxide abrasive. Aluminum oxide discs are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and should be used for applications on ferrous metals and composites. Aluminum oxide discs feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades ranging from Very Fine to Coarse.Strong Backing for Better PerformanceFor the best results, it is recommended that a Standard Abrasives™ brand holder pad is used. Tests have shown that surface conditioning discs, when used in conjunction with the Standard Abrasives holder pad, have a greater durability and performance rate. These pads also assure that pressure is applied evenly all the way to the edge of the disc.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.