Scotch-Brite™ Roloc™ Light Grinding and Blending Disc, TSM, 2 in x NH Heavy Duty A CRS, 50 per inner, 200 per case
We constructed our Scotch-Brite™ Roloc™ Light Grinding and Blending Discs with a ceramic abrasive grain blend to achieve a high cut-rate for optimal weld grinding and blending in mild-steel applications. In these instances, Light Grinding and Blending discs are designed to effectively blend and refine a grade 36 scratch or finer.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000778
-
3M ID61500292836
-
UPC00-48011-60374-2
-
Product Formal NameScotch-Brite™ Roloc™ Light Grinding and Blending Disc, TSM, 2 in x NH Heavy Duty A CRS, 50 per inner, 200 per case
-
Brand-oldScotch-Brite
-
BrandRoloc, Scotch-Brite
-
Case UnitCase of 200
-
Unit of MeasureEach
-
Inner UnitInner of 50
-
Estimated Lead Time2
-
GradeCRS
-
Grit/MicronCoarse
-
Size2 in x NH
-
Diameter2 in
-
Diameter (Metric)50.8 mm
-
ColorPink
-
Color-oldMaroon
-
Inventory Status CodeS
-
PositionBest
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxmx4YtBOv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormDisc
-
IndustriesMetalworking
-
ApplicationsDeburring
-
Sub ApplicationsBlending
-
Sub IndustriesMetal Fabrication
-
Equipment - MachinesDisc Sanders
-
Attachment TypeTSM
-
Mineral TypeCeramic
-
Max RPM25000 none
-
Return PolicyNo Return
-
Width2 in
-
Box Length (in)10.6
-
Box Width (in)10.6
-
Box Height (in)5.5
- Bullets
-
Bullet 1Grinds and blends in a single step
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805301000
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000778
-
UPC/ISBN00048011603742
Additionally, our Light Grinding and Blending discs can often single-handedly prepare surfaces for painting, where a 3 mil or greater paint thickness is being applied, without adding a final dual-action sanding step. 3M™ ceramic aluminum oxide abrasive is a ceramic mineral designed using our proprietary process to enhance toughness and hardness of the grain for a higher level performance. Ceramic aluminum oxide blend is engineered to fracture frequently and surpasses aluminum oxide abrasives in both cut-rate and durability. Perfect for moderate to heavy stock removal as well as finishing, ceramic abrasives are built to cut fast and handle intense heat and stress applications. Our 3M™ Roloc™ quick change discs are smaller discs that easily and quickly attach onto a Roloc™ disc pad (sold separately) so that you can conveniently change discs fast and easily to accommodate different tasks or multi-step finishing processes. The Roloc™ system provides a secure attachment even for heavy-duty applications, and the variety of available 3M™ Roloc™ discs allows swapping from one application to the next in seconds. Each disc is also color-coded to identify its grade, making it easy to grab the grade required for different applications.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.