Scotch-Brite™ Cut and Polish Disc, CP-DC, A/O Medium, 6 in x 1/2 in, 100 per case

Our Scotch-Brite™ Cut and Polish Disc is engineered to produce satin or high-luster finishes and may be used for cleaning or light deburring on a variety of metals. The durable open-web construction is designed to resist loading and greatly increase the life of the disc.
Price: $659.66

(Case of 100 Each)

  • $659.66
  • Case of 100 - $659.66
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      6.6 lbs
    • SKU
      7000046014
    • UPC/ISBN
      00048011008288
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000046014
  • 3M ID
    61500120896
  • UPC
    00-48011-00828-8
  • Product Formal Name
    Scotch-Brite™ Cut and Polish Disc, CP-DC, A/O Medium, 6 in x 1/2 in, 100 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 100
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Grade
    MED
  • Grit/Micron
    Medium
  • Size
    6 in x 1/2 in
  • Diameter
    6 in
  • Diameter (Metric)
    152.4 mm
  • Color
    Tan
  • Color-old
    Tan
  • Inventory Status Code
    S
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8tZ4x2BPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Disc
  • Mineral Type
    Aluminum Oxide
  • Max RPM
    4000 none
  • Return Policy
    No Return
  • Width
    6 in
  • Length
    1/2 in
  • Box Length (in)
    12.5
  • Box Width (in)
    12.4
  • Box Height (in)
    9.2
  • Bullets
    • Bullet 1
      - aluminum oxide mineral delivers an aggressive cut with a polished surface
      - durable Non-woven web construction resists loading, prolonging service life of the Disc
      - Ideal for aggressive blending and finishing
      - Versatile Disc May be used on bench motor or Straight shaft tool
      - Provides High cut-rate and low heat retention, allowing extended contact with the workpiece
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      124790
    • NMFC Class
      060.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000046014
  • UPC/ISBN
    00048011008288

We used aluminum oxide mineral for our Scotch-Brite™ Cut and Polish Disc, which is a popular mineral choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys. Our Scotch-Brite™ industrial abrasives are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.