3M™ Wetordry™ Cloth Disc 481W, 8 in x NH, 320, 25 per inner, 100 per case
Our 3M™ Wetordry™ Cloth Disc 481W was designed to help operators finish metal surfaces, as well as prep them for paint. Wetordry™ cloth may be run wet or dry and helps rid your workpiece of unwanted coatings and corrosion.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000119275
-
3M ID60440235327
-
UPC00-51111-55838-6
-
Product Formal Name3M™ Wetordry™ Cloth Disc 481W, 8 in x NH, 320, 25 per inner, 100 per case
-
Brand-oldWetordry
-
BrandWetordry
-
Case UnitCase of 100
-
Unit of MeasureEach
-
Inner UnitInner of 25
-
Product ID481W
-
Estimated Lead Time2
-
Grade320
-
Grit/Micron320
-
Size8 in x NH
-
Diameter8 in
-
Diameter (Metric)203.2 mm
-
ColorBlack
-
Color-oldBlack
-
Inventory Status CodeS
-
PositionBetter
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmx_xP8mGov70k17zHvu9lxtD7SSSSSS--
-
Country of OriginJapan
-
Product FormDisc
-
IndustriesGeneral Industrial
-
ApplicationsFinishing
-
Sub ApplicationsBuffing & Polishing
-
Backing MaterialCloth
-
Equipment - MachinesHand Sanding
-
Mineral TypeSilicon Carbide
-
Return PolicyNo Return
-
Width8 in
-
Box Length (in)8.5
-
Box Width (in)8.5
-
Box Height (in)5.9
- Bullets
-
Bullet 1- fast-cutting silicon carbide mineral Leaves a consistent scratch pattern while reducing the need for Heavy manual pressure
- May be used for paint prep
- Sands a variety of substrates, from metals to hardwoods
- water-resistant polyester backing means cloth May be run wet or dry
- a good alternative for compounds and lubricants
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805100000
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000119275
-
UPC/ISBN00051111558386
Finish and Repair 3M™ Wetordry™ Cloth Disc 481W features silicon carbide – a mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, silicon carbide produces a superior finish. Users apply light pressure to obtain a consistent scratch pattern that is often desirable for final finishing. One of its greatest features is its versatility – it may be used on a variety of substrates: metals, whitewood, softwood and hardwoods. 3M™ Wetordry™ Cloth Disc 481W is used with a disc pad holder, so operators can abrade the workpiece by hand. The Benefits of Cloth-Backed DiscsThe cloth backing on this disc is a durable, water-resistant polyester screen. We engineer our 3M™ Wetordry™ products to include our proprietary waterproof cloth backing, which supports both wet and dry applications. Cloth-backed discs are known for their durability and flexibility; they're a good first choice when working with metal or for heavy wood stock removal. At the same time, these applications tend to produce a significant amount of dust, clogging the abrasive points and creating an inferior work environment. These effects may be minimized by sanding with water to rinse dust away from the workpiece and the abrasive surface.Some technicians like using the abrasive dry, because they can quickly inspect the work. With wet sanding, water is used as a lubricant. This keeps the abrasive clear of loading and can prolong the life of the abrasive.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.