3M™ Cross Pad 747D, 6 x 6 x 2 in, 80 X-weight, 10 per inner, 50 per case
3M™ Cross Pad 747D is used for polishing of small radii and channels, deburring the ends and insides of tubing, and other special applications. When inserted into a hole or channel, the flexible cross shape conforms to the inside diameter of the workpiece, making this a versatile accessory for your finishing jobs.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time15
-
Manufacturer3M
-
SAP7100105414
-
3M ID60440310054
-
UPC00-76308-65356-9
-
Product Formal Name3M™ Cross Pad 747D, 6 x 6 x 2 in, 80 X-weight, 10 per inner, 50 per case
-
Case UnitCase of 50
-
Unit of MeasureEach
-
Inner UnitInner of 10
-
Product ID747D
-
Estimated Lead Time15
-
Grit/Micron80
-
Size6 in x 6 in x 2 in
-
Inventory Status CodeN
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8_14xmBMv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Width6 inx 6 in
-
Length6 in
-
Box Length (in)13.6
-
Box Width (in)11.9
-
Box Height (in)6.2
- Bullets
-
Bullet 1- flexible, cross-shaped sanding pad fits into holes or Channels of various sizes
- Abrasive is bonded to Heavy, X-weight cotton cloth backing for durability during sanding
- Ceramic aluminum oxide Blended mineral breaks down to reveal sharp cutting edges
- durable Resin bond resists deterioration from heat, extending the life of the cross pad
- cross pad attaches to a compatible mandrel (sold separately) for Use with a die grinder
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805100000
-
UNSPSC Code31191504
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100105414
-
UPC/ISBN00076308653569
Designed for Tough JobsThe X-weight cloth backing of our 3M™ Cross Pad 747D supports both grinding and polishing applications. It has a closed coat of aluminum oxide abrasive secured with a heat-resistant resin bond. This cross pad works well where polishing or deburring is needed. The cross pad attaches to a threaded mandrel (sold separately) that attaches to a die grinder or power drill. Together, the mandrel and cross pad enable the user to grind or finish the inner contours of various-sized channels. Max RPM depends on the size of the pad.Blended Materials that Stay SharpThe surface of the 3M™ Cross Pad 747D is covered with blend of ceramic and aluminum oxide mineral, which enhances the toughness and hardness of the grain. Perfect for stock removal, ceramic abrasives are engineered to fracture frequently for a super-fast cut and can handle intense heat and stress applications. The ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes our 3M™ Cross Pad 747D an excellent choice for moderate stock removal and surface preparation.High Quality ConstructionAbrasive grains are attached to the pad using an anti-friction resin bonding material, which helps the abrasive run smoothly over the workpiece. A grinding aid coating is also added to help the abrasive stay cool during grinding, minimizing heat and improving abrasive performance. This attribute, combined with the semi-flexible X-weight backing, make this pad a good match for projects that require a strong sanding tool that can be used with minimal space or leverage.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.