Standard Abrasives™ Buff and Blend Cross Buff HP 725006, 1-1/2 in x 1/2 in x 3 Ply x 8-32 A VFN, 50 per inner 500 per case

We built our Standard Abrasives™ Buff and Blend Cross Buff HP with a unique design that conforms to a variety of metal surfaces, making it ideal for polishing and cleaning inside diameters and hard-to-reach areas.
Price: $2644.16

(Case of 500 Each)

Inner price: $396.63

(Inner of 50 Each)

  • $2644.16
  • Case of 500 - $2644.16
    Inner of 50 - $396.63
 
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      8.5 lbs
    • SKU
      7000046827
    • UPC/ISBN
      00051115330087
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000046827
  • 3M ID
    66000006099
  • UPC
    00-51115-33008-7
  • Product Formal Name
    Standard Abrasives™ Buff and Blend Cross Buff HP 725006, 1-1/2 in x 1/2 in x 3 Ply x 8-32 A VFN, 50 per inner 500 per case
  • Brand-old
    Standard Abrasives
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 500
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 50
  • Part Number
    2560896;725006
  • Estimated Lead Time
    2
  • Grade
    VFN
  • Grit/Micron
    Very Fine
  • Size
    1-1/2 in x 1/2 in x 3 Ply x 8-32
  • Diameter
    1.5 Inch
  • Diameter (Metric)
    38.1 mm
  • Color-old
    Red
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/563940O/standard-abrasives-quick-change-discs-for-disc-sanders.pdf&fn=61-5002-8236-5_2014_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYtvPYtxOv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Cross Buff
  • Backing Material
    Non-woven
  • Attachment Type
    Eyelet
  • Mineral Type
    Aluminum Oxide
  • Form Type
    Cross
  • Max RPM
    20000
  • Return Policy
    No Return
  • Width
    1-1/2 in
  • Length
    1/2 in x 3 Ply x 8-32
  • Box Length (in)
    22.8
  • Box Width (in)
    9.3
  • Box Height (in)
    8.5
  • Bullets
    • Bullet 1
      - HP material’s durable construction is aggressive and withstands heavy edge work while deburring, contributing to longer service life
      - Ability to conform to the substrate makes the Buff and Blend Cross Buff ideal for edge deburring on Aluminum extrusions
      - May be used for deburring on aluminum die cast flashing
      - Aluminum oxide mineral offers an aggressive cut, useful for removing heavy surface oxidation
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000046827
  • UPC/ISBN
    00051115330087

Standard Abrasives™ Buff and Blend Cross Buff HP has great versatility and may be used for a variety of applications, including cleaning, removing surface oxidation, rust and surface coatings for part inspection, surface preparation prior to coating, removing corrosion on steel rule and kirksite dies. Standard Abrasives™ Buff and Blend Cross Buff HP polishes round and square tubing, valve spools, molds, dies and inside diameters of lifter bore, valve bodies and brake cylinders.Standard Abrasives™ Buff & Blend Products are made from tough, resin-reinforced nylon fiber with aluminum oxide abrasive grain. Each of the Standard Abrasives Buff & Blend materials offers unique benefits. HP is a stiff material that produces an aggressive cut rate, designed for applications where metal removal is required.We used aluminum oxide mineral, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes for a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.