Scotch-Brite™ Clean and Strip Bonded Cleaning Brush, 13 in x 71 in x 5-3/4 in 7S XCS, 1 per case, SPR 019833A

Our Scotch-Brite™ Clean and Strip Bonded Cleaning Brush aggressively cleans and deburrs a variety of hard metals. It’s a heavy-duty abrasive designed to clean substrates and rid them of rust, corrosion, light mill scale and other surface contaminants from metal sheet or coil.
Price: $17995.76

(Case of 1 Each)

Estimated Lead Time is 25 working days.
  • $17995.76
  • Case of 1 - $17995.76
Free shipping
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      287.3 lbs
    • SKU
    • UPC/ISBN
  • Lead Time
  • Manufacturer
  • SAP
  • 3M ID
  • UPC
  • Product Formal Name
    Scotch-Brite™ Clean and Strip Bonded Cleaning Brush, 13 in x 71 in x 5-3/4 in 7S XCS, 1 per case, SPR 019833A
  • Brand
  • Case Unit
    Case of 1
  • Unit of Measure
  • Estimated Lead Time
  • Grit/Micron
    Extra Coarse
  • Size
    13 in x 71 in x 5-3/4 in
  • Inventory Status Code
  • Instructions/Manual
  • Country of Origin
  • Product Form
  • Return Policy
    No Return
  • Width
    13 in
  • Length
    71 in
  • Box Length (in)
  • Box Width (in)
  • Box Height (in)
  • Bullets
    • Bullet 1
      - Available in different densities, so operators can choose the right grade for their specific project
      - Made with sharp cutting silicon carbide mineral for a fast, sustained cut
      - Steel core helps minimize brush's tendency to yield or deflect on the workpiece
      - Open web resists loading, contributing to longer abrasive service life
      - Open web responds to surface irregularities without altering geometry of the part
  • Transportation
    • ECCN Number
    • Harmonized Tariff Schedule Number
    • UNSPSC Code
    • United States Department Of Transportation Ground US DOT, 49 CFR
    • United States Department Of Transportation Vessel US DOT, 49 CFR
    • NMFC Item
    • NMFC Class
    • NMFC Sub
    • Transport Protective Service
    • International Air Transport Association
    • International Maritime Organization
    • Flashpoint Transport
      No Flash Point
  • SKU

Heavy-Duty CleaningAnchorAmong our Scotch-Brite™ Flap and Cleaning Brushes, the Scotch-Brite™ Clean and Strip Bonded Cleaning Brush is one of the most aggressive brushes.AnchorCombining extra coarse (XCS) silicon carbide mineral with hard densities (5, 7) makes this Scotch-Brite™ brush especially tough and strong. When brought in contact with the workpiece, this brush will not yield or cut as softly other brushes – for example, the Clean & Finish Flap Brush or the High Strength Flap Brush. As operators know, many variables impact which abrasive should be used. For some applications, a lighter, softer abrasive is the best choice. For applications that require heavy-duty cleaning, our Scotch-Brite™ Clean and Strip Bonded Cleaning Brush is a good choice.AnchorAnchorDurable Construction of Scotch-Brite™ Cleaning BrushesAnchorWe engineer Scotch-Brite™ cleaning brushes by attaching circular sections of non-woven material to a cylindrical core. Typical applications for cleaning brushes include coil cleaning prior to coating, deburring, reclaiming sheet and coil and scale / oxide removal. The Scotch-Brite™ brush has an arbor hole to accommodate a shaft and may be secured in place with a flange and key. It will not fray or splinter when faced with edges. The steel core on the brush keeps it sturdy and adds a level of durability to the brush when it’s run on finishing equipment. Operators may choose to add a lubricant or coolant when cleaning, because it helps wash away swarf and reduce loading, which extends the brush’s service life.AnchorAnchorThe Many Benefits of Open Web AbrasivesNonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral.AnchorFibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite™ products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite™ abrasives work fast and deliver consistent results, part after part.Note: When ordering a bonded construction cleaning brush, please allow an additional 1-1/4" to provide clearance for the 5/8" lock collars located at both ends of the brush. For instance, if you require 40" of usable brush width, order a 40" wide brush. This brush, however, when measured at the core will actually be 41-1/4" including the lock collars.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.