3M™ Paper Belt 466UZ, P400 F-weight, 52 in x 103 in, Sine-lok, Full-flex

3M™ Paper Belt 466UZ is a smooth running belt constructed with silicon carbide mineral, bonded to an F-weight paper backing. The semi-closed coat construction efficiently sands and finishes flat surfaces in woodworking applications. F-weight is one of the heaviest, most durable paper backings available and will achieve finer finishes than cloth backed belts in the same grade.
Price: $728.87

(Case of 5 Each)

  • $728.87
  • Case of 5 - $728.87
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      19.23 lbs
    • SKU
      7010308473
    • UPC/ISBN
      00051115287312
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7010308473
  • 3M ID
    60440217432
  • UPC
    00-51115-28731-2
  • Product Formal Name
    3M™ Paper Belt 466UZ, P400 F-weight, 52 in x 103 in, Sine-lok, Full-flex
  • Brand-old
    3M
  • Case Unit
    Case of 5
  • Unit of Measure
    Each
  • Product ID
    466UZ
  • Estimated Lead Time
    2
  • Grade
    P400
  • Grit/Micron
    400
  • Size
    52 in x 103 in
  • Size Metric
    103 Inch x 2616.2 mm
  • Color
    Black
  • Inventory Status Code
    S
  • Position
    Best
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82e48_G4v70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Belt
  • Industries
    Woodworking
  • Applications
    Sanding
  • Sub Applications
    Wide Belt Sanding
  • Sub Industries
    Primary Wood and Panel Processing
  • Backing Material
    Paper
  • For Use On
    Hardwood
  • Equipment - Machines
    Wide Belt Sanders
  • Mineral Type
    Silicon Carbide
  • Backing Weight
    F Weight
  • Return Policy
    No Return
  • Width
    52 in
  • Length
    103 in
  • Box Length (in)
    55.3
  • Box Width (in)
    8.4
  • Box Height (in)
    11.9
  • Bullets
    • Bullet 1
      - F-weight, Fullflex Heavy paper backing Provides durability and smooth operation in either direction
      - Anti-static treatment helps manage dust and loading
      - Sine wave splice prevents hinging in splice area, resists fatigue, and Minimizes chatter marks
      - silicon carbide Abrasive produces finer Finish than aluminum oxide
      - semi-Closed coat construction produces finer Finish than open coat abrasives
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805200000
    • UNSPSC Code
      31191504
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001060
    • NMFC Class
      125.0
    • NMFC Sub
      05
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010308473
  • UPC/ISBN
    00051115287312

The paper backing provides smooth operation and durability. The abrasive side features a semi-closed coat structure that provides greater grain density to achieve finer finishes than open coat belts. This belt also features our dust management technology that reduces static charge in the dust particles, allowing them to be pulled away when coupled with an efficient dust collection system. To help provide your desired finishing results, the belt ends are joined using a sine wave splice that promotes belt strength and resists hinging and splice fatigue. The splice travels smoothly over contact wheels and platens, minimizes chatter marks, and promotes smooth operation in either direction for consistent finishing results.Our 3M™ Paper Belt 466UZ uses silicon carbide, a synthetic mineral that is very sharp and commonly used for low pressure applications such as final finishing in whitewood sanding. While it breaks down faster than aluminum oxide, it produces a superior finish.Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used to dimension and sand large wooden panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge or portable belt sanders for sanding or blending wood pieces such as cabinet doors.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.