• 0
Scotch-Brite™ SL Surface Conditioning Belt, SL-BS, Super Duty A/O Coarse, Config

Scotch-Brite™ SL Surface Conditioning Belt, SL-BS, Super Duty A/O Coarse, Config

Scotch-Brite™ SL Surface Conditioning Belt is a durable, aggressive non-woven belt that balances flexibility with aggressive cutting action. It blends and finishes consistently, often in one step.
Scotch-Brite
Estimated Lead Time is 9 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      3 lbs
    • SKU
      7100012060
    • UPC/ISBN
      00048011646060
  • Industry
    IB
  • Lead Time
    9
  • Manufacturer
    3M
  • SAP
    7100012060
  • 3M ID
    61000050726
  • Product Formal Name
    Scotch-Brite™ SL Surface Conditioning Belt, SL-BS, Super Duty A/O
    Coarse, Config
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    9
  • Grit/Micron
    Coarse
  • Size
    Configurable
  • Inventory Status Code
    Configurable
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4YtGO8tUNv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Belt
  • Return Policy
    No Return
  • Width
    Configurable
  • Length
    Configurable
  • Bullets
    • Bullet 1
      - aluminum oxide mineral, Available in a range of grades, cuts sharp and Leaves a fine Finish
      - for Use on backstand and off hand equipment
      - Reinforced backing and Non-woven open web material Provides superior flexibility for detail Work, over contours and edges
      - reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
      - aggressive cutting without gouging, removes surface imperfections, grindlines, mill and other marks
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001060
    • NMFC Class
      000.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100012060
  • UPC/ISBN
    00048011646060

Balancing Flexibility and DurabilityAmong our surface conditioning belts, the Scotch-Brite™ SL Surface Conditioning Belt falls right in the middle of the spectrum in terms of its durability and flexibility. Balancing both of these elements makes it a good match for medium-duty projects on hard metals. Examples of applications may include intermediate blending, deburring, finishing and cleaning on stainless steel, carbon steel, titanium and nickel alloys. All Scotch-Brite™ SL Surface Conditioning Belts utilize aluminum oxide mineral, but they vary in aggressiveness: Super Duty (SD), Heavy Duty (HD), Coarse (CRS) and Medium (MED).A Responsive BeltThe reinforced backing on Scotch-Brite Surface Conditioning Belts offers good flexibility whether working on a file belt or backstand. All belts may be used for “low stretch” applications, because, while flexible, they also stay taut and firm. To engineer the belt, we combine non-woven nylon fibers and mineral with resin. Mixing non-woven nylon fibers, which are springy and responsive, with mineral is an ideal way to add a great finish or remove burrs without gouging or undercutting the workpiece. We also include a woven fabric (scrim) in our conditioning products, which is embedded in the nylon structure to provide additional strength and durability for edge work.Benefits of Aluminum Oxide MineralScotch-Brite™ SL Surface Conditioning Belt uses coarse grade aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing.Surface conditioning belts are used for rapid grinding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog with debris and quickly become less efficient. Belts continue to sand without clogging, because small grooves in the abrasive belt open as they go around the arc of the drive wheel. Scotch-Brite™ Surface Conditioning Belts present a swift and efficient means to achieve desired finishes.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.