3M™ Cloth Belt 777F, 36 YF-weight, 2 in x 60 in, Film-lok, Single-flex, 10 per inner, 50 per case
3M™ Cloth Belt 777F features a blend of 3M™ Ceramic Abrasive Grain and aluminum oxide for increased durability and cutting efficiency and is suitable for moderate stock removal to finishing operations. The heavyweight cloth backing supports high-pressure applications, works well on heat-sensitive metals, and can be used in wet or dry applications.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7010325861
-
3M ID60430036271
-
UPC00-51144-77663-4
-
Product Formal Name3M™ Cloth Belt 777F, 36 YF-weight, 2 in x 60 in, Film-lok, Single-flex, 10 per inner, 50 per case
-
Brand-old3M
-
Case UnitCase of 50
-
Unit of MeasureEach
-
Inner UnitInner of 10
-
Product ID777F
-
Estimated Lead Time2
-
Grade36
-
Grit/Micron36
-
Size2 in x 60 in
-
Size Metric60 Inch x 1524 mm
-
Color-oldOrange
-
Inventory Status CodeS
-
PositionBetter
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8tSoxmxOv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormBelt
-
IndustriesMetalworking
-
ApplicationsDeburring
-
Sub ApplicationsBlending
-
Sub IndustriesBuilders Hardware
-
Backing MaterialPolyester Cloth
-
For Use OnAluminum
-
Equipment - MachinesBench Top Motors
-
Mineral TypeCeramic
-
Backing WeightYF Weight
-
Back ColorBrown
-
Return PolicyNo Return
-
Width2 in
-
Length60 in
-
Box Length (in)16
-
Box Width (in)16
-
Box Height (in)11.1
- Bullets
-
Bullet 1- Ceramic aluminum oxide grain blend cuts faster and lasts longer than traditional aluminum oxide
- produces more parts per belt than traditional aluminum oxide belts, requiring fewer belt changes
- Heavyweight polyester backing supports High-pressure applications and can be run wet or dry
- Contains a grinding aid to reduce heat and increase performance when grinding stainless steel
- durable Resin bond resists heat deterioration, which Extends the life of the belt
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805100000
-
UNSPSC Code31191504
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001060
-
NMFC Class085.0
-
NMFC Sub08
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010325861
-
UPC/ISBN00051144776634
Deburr, Blend and Finish Stainless Steel3M™ Cloth Belt 777F contains a grinding aid that reduces running temperatures when used on heat-sensitive alloys like stainless steel, nickel alloys and cobalt alloys. The abrasive grain is bonded to the backing with resin to maintain durability under high heat and pressure. This belt is recommended for use on stainless steel or other exotic metal alloys for dimensioning parts, deburring, blending, and finishing castings and forgings.Ceramic Abrasive Grain Boosts PerformanceFor increased performance, 777F products feature aluminum oxide blended with 3M ceramic abrasive grain for a harder, longer-lasting abrasive. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes the Cloth Belt 777F an excellent choice for moderate stock removal and surface preparation.Sized to Suit Your NeedsThese abrasive belts are available in various widths and lengths for sanding both wood and metal. We offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough-cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.Find Your FlexBelts come with various flexibilities and splices that join the belt ends. Our 3M™ Cloth Belt 777F has a film splice for added strength when grinding in high pressure applications. When greater flexibility may be needed to increase conformity or for a softer touch for finishing and blending, an L-flex provides more flexibility than the standard flex, and a full flex belt is the most flexible.ApplicationsModerate stock removalDeburring stainless steelFinishing stainless steelSurface preparation
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.