3M™ PPS™ UV Standard Lid & Liner Kit, 50730, Standard (22 fl oz, 650 mL), 125 Micron Filters, 1 kit per case

3M™ PPS™ UV Standard Lid & Liner Kit is a black, non-transparent version of our 3M™ PPS™ Standard Kit, designed for UV light curing materials. It contains 50 black lids (with 125 micron filters), 50 black liners and 24 black sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. PPS™ disposable lids contain welded-in filters which strain paint material while spraying.
Price: $139.17

(Case of 1 Case)

  • $139.17
  • Case of 1 - $139.17
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      4.1 lbs
    • SKU
    • UPC/ISBN
  • Lead Time
  • Manufacturer
  • SAP
  • 3M ID
  • UPC
  • Product Formal Name
    3M™ PPS™ UV Standard Lid & Liner Kit, 50730, Standard (22 fl oz, 650 mL), 125 Micron Filters, 1 kit per case
  • Brand
  • Case Unit
    Case of 1
  • Unit of Measure
  • Part Number
  • Estimated Lead Time
  • Inventory Status Code
  • Country of Origin
  • Return Policy
    No Return
  • Box Length (in)
  • Box Width (in)
  • Box Height (in)
  • Bullets
    • Bullet 1
      - Black, non transparent version of the 3M™ PPS™ Standard Lid & Liner Kit
      - Designed for use with 3M™ PPS™ (Legacy) paint preparation system
      - Black color keeps out UV light
      - Kit contains 50 black lids (with 125 micron filters), 50 black liners and 24 black sealing plugs
      - PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
      - System enables the painter to consistently spray at 90 degrees (even upside down), often reducing paint consumption
      - All-in-one solution reduces chance of outside contamination, delivers consistent material transfer to improve quality, reduce paint consumption
      - PPS™ reduces cleaning solvent consumption by up to 70%, reduces prep and clean-up time by as much as 50%
      - Sealing plugs are provided for temporary sealing and protecting of non-catalyzed paint materials
      - System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use
  • Transportation
    • ECCN Number
    • Harmonized Tariff Schedule Number
    • UNSPSC Code
    • United States Department Of Transportation Ground US DOT, 49 CFR
    • United States Department Of Transportation Vessel US DOT, 49 CFR
    • NMFC Item
    • NMFC Class
    • NMFC Sub
    • Transport Protective Service
    • International Air Transport Association
    • International Maritime Organization
    • Flashpoint Transport
      No Flash Point
  • SKU

Black Color Shields Paint from UV Light3M™PPS™UV Standard Lid & Liner Kit contains 50 disposable black lids with pre-welded micron filters for straining paint, 50 disposable black liners, and 24 black sealing plugsfor use with the 3M™ PPS™ (Legacy) paint preparation system. Designed with a black color to keep out UV light, the kit is recommended for UV light curing materials such as primer, sealer, base-coat and clear coats that are sensitive to daylight.Advantages of the 3M™ PPS™SystemUnlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™Cup. Then simply mix the paint in the PPS™disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™System. With just these few simple steps, you#39;re ready to start spraying.Your Spray Gun Functions at any Angle, Even Upside DownPPS™allows the painter to spray consistently 90 to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.Clean Up is a Breeze and Uses Less SolventAfter spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings.Most guns can be cleaned with less than 3 oz. of solvent.A Versatile System that Works with Most Spray GunsSpecifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun.Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.Reduces the Chance of Contamination Between JobsBecause the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.The Bottom Line: Why 3M is the Paint & Coatings Spray System of Choice3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You#39;ll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.