3M™ PPS™ Series 2.0 Universal Shaker Core, 26458, 12 per case

3M™ PPS™ Series 2.0 Universal Shaker Core fits on top of the domed 3M™ PPS™ 2.0 Lid and fits into the ¼-turn lid locking system, creating a stable, durable and even surface for clamping PPS™ 2.0 hard cups tightly into paint shakers.
Price: $44.61

(Case of 12 Each)

  • $44.61
  • Case of 12 - $44.61
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.203 lbs
    • SKU
    • UPC/ISBN
  • Lead Time
  • Manufacturer
  • SAP
  • 3M ID
  • UPC
  • Product Formal Name
    3M™ PPS™ Series 2.0 Universal Shaker Core, 26458, 12 per case
  • Brand
  • Case Unit
    Case of 12
  • Unit of Measure
  • Part Number
  • Estimated Lead Time
  • Inventory Status Code
  • Country of Origin
  • Return Policy
    No Return
  • Box Length (in)
  • Box Width (in)
  • Box Height (in)
  • Bullets
    • Bullet 1
      - Double-sided design works with all PPS™ Series 2.0 hard cup sizes
      - Excellent for shops where paint shakers are used
      - Forms durable clamping surface when placing PPS™ Series 2.0 hard cups in paint shakers
      - Fits with ¼-turn lid locking system for tight, reliable hold
      - Absorbs and distributes force from shaker for longer equipment life
  • Transportation
    • ECCN Number
    • Harmonized Tariff Schedule Number
    • UNSPSC Code
    • United States Department Of Transportation Ground US DOT, 49 CFR
    • United States Department Of Transportation Vessel US DOT, 49 CFR
    • NMFC Item
    • NMFC Class
    • NMFC Sub
    • Transport Protective Service
    • International Air Transport Association
    • International Maritime Organization
    • Flashpoint Transport
      No Flash Point
  • SKU

Designed for Using 3M™ PPS™ Series 2.0 Hard Cups in Paint ShakersExcellent for using 3M™ PPS™ Series 2.0 in shops where mixing in paint shakers is common, our 3M™ PPS™ Series 2.0 Universal Shaker Core is designed specifically to work with PPS™ 2.0 Lids and reusable hard cups. Shaker cores are designed to fit on top of domed lids and to fit into the ¼-turn lid locking system, forming a tight fit to the cup and a reliable hold during the shaking process. The double-sided design works with all sizes of 3M™ PPS™ Series 2.0 hard cups. When the paint shaker is activated, the shaker core absorbs and distributes the force from the shaker through the clamps. Each side of the core makes an even and very reliable surface for clamping, and to help prevent the cup from tipping during temporary sealing and protection of paint materials. This simple tool provides extra peace of mind during paint shaking and can result in longer life for reusable PPS™ Series 2.0 hard paint cups.Next Generation of the 3M™ PPS™ Paint Preparation System The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings. Cleanest Disposable Cup System Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.Reduce Material Waste by Mixing in the Cup3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.Improved Fluid Flow for More Consistent Paint ApplicationOur 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.More Confidence in the Connection to Your GunA new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.A System for Both Solvent-Based and Waterborne ProductsEvery lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.Use the Right Size Cup for Every RepairOur PPS™ 2.0 Spray Cup System is av

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.