3M™ PPS™ Series 2.0 Adapter, 26138, Type S42, 3/8 Female R-Angle, 19 Thread BSP, 4 per case

3M™ PPS™ Series 2.0 Adapter provides four points of connection from lid-to-gun and converts typical spray guns into ones that work with the 3M™ PPS™ Series 2.0 Spray Cup System. Specifically designed adapters allow painters to use PPS™ with virtually any spray gun model. To use this adapter, remove the existing spray gun cup. Then simply thread the correct PPS™ Adapter into the spray gun.
Price: $129.99

(Case of 4 Each)

  • $129.99
  • Case of 4 - $129.99
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      0.741 lbs
    • SKU
      7100135930
    • UPC/ISBN
      00051131261389
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100135930
  • 3M ID
    60455003156
  • UPC
    00-51131-26138-9
  • Product Formal Name
    3M™ PPS™ Series 2.0 Adapter, 26138, Type S42, 3/8 Female R-Angle, 19 Thread BSP, 4 per case
  • Brand
    PPS
  • Case Unit
    Case of 4
  • Unit of Measure
    Each
  • Part Number
    26138
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    6.6
  • Box Width (in)
    5.4
  • Box Height (in)
    5
  • Bullets
    • Bullet 1
      - Adapter converts virtually any cup spray guns into ones that work with 3M™ PPS™ Series 2.0, our next generation, highest performing disposable spray cup system
      - Provides a four-point lid-to-spray-gun connection and a wider 360° platform for stability and reliability
      - Stainless steel adapter offers exceptional durability and resistance to solvents
      - Wider bowl design makes adapter easy to clean
      - All-in-one disposable cup solution reduces chance of outside contamination, delivers consistent material transfer for improved quality and reduced paint consumption
      - 3M™ PPS™ reduces cleaning solvent consumption by up to 70%
      - 3M™ PPS™ helps painters improve quality, lower material cost, reduce solvent consumption and improve productivity with less mess and easier use than traditional metal/plastic paint cup systems
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8424909080
    • UNSPSC Code
      31211900
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      095190
    • NMFC Class
      000.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100135930
  • UPC/ISBN
    00051131261389

Designed for 3M™ PPS™ Series 2.0The redesigned 3M™ PPS™ Series 2.0 Adapter converts leading commercial spray guns into ones that can use the 3M™ PPS™ Series 2.0 Spray Cup System. This design provides four points of connection from lid-to-gun, offering improved stability and confidence during fast-paced, high-volume spraying. 3M™ PPS™ Series 2.0is the next generation of the 3M™ PPS™ paint preparation system. The 3M™ PPS™ system features disposable lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job, and helps lower your cost per use.Next Generation of the 3M™ PPS™ Paint Preparation SystemThe 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.Cleanest Disposable Cup System Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.Reduce Material Waste by Mixing in the Cup3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you're mixing on a scale, use the max fill" notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.Improved Fluid Flow for More Consistent Paint ApplicationOur3M™ PPS™Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration - no assembly needed.More Confidence in the Connection to Your GunA new adapter design provides a four-point connection and a wider 360 platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.A System for Both Solvent-Based and Waterborne ProductsEvery lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.Use the Right Size Cup for Every RepairOur PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduce

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.