3M™ PPS™ Mini Cups/Collars and Lids/Liners, 16514, 462 kits per case

Hard cup and collar and mini PPS™ flexible lid and liner, part number 16114. Kit contains 1 cup/collar and 1 lid/liner
Estimated Lead Time is 26 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      183.4 lbs
    • SKU
      7010364240
    • UPC/ISBN
      00051131165144
  • Industry
    IB
  • Lead Time
    26
  • Manufacturer
    3M
  • SAP
    7010364240
  • 3M ID
    60455052534
  • UPC
    00-51131-16514-4
  • Product Formal Name
    3M™ PPS™ Mini Cups/Collars and Lids/Liners, 16514, 462 kits per case
  • Brand
    PPS
  • Case Unit
    Case of 462
  • Unit of Measure
    Kit
  • Estimated Lead Time
    26
  • Inventory Status Code
    N
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    45.6
  • Box Width (in)
    37.6
  • Box Height (in)
    17.8
  • Bullets
    • Bullet 1
      - Designed for use with 3M™ Paint Preparation System, PPS™
      - Kits contain disposable Mini-sized cups, collars, liners and lids with micron filters
      - Stock PPS™ Mini Lids, Liners, Cups and Collars efficiently and cost-effectively
      - Mini (180mL) size is excellent for 1-panel repairs
      - Choose 200 micron or 125 micron filters for solvent or waterborne paint systems
      - PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
      - System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
      - Reduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption
      - PPS™ reduces cleaning solvent consumption by up to 70%, reduces prep and clean-up time by as much as 50%
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8424909080
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      156600
    • NMFC Class
      100.0
    • NMFC Sub
      06
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010364240
  • UPC/ISBN
    00051131165144

Mini-Sized Kits for Added Efficiency with 3M™ PPS™Excellent for efficiently stocking PPS™ Mini-sized components, 3M™ PPS™ Cups/Collars & Lids/Liners are pre-assembled kits containing hard cups, collars, disposable lids and disposable liners specifically for use with the 3M™Paint Preparation System (PPS™). 3M designed the PPS™ system with hard cups and disposable liners - users can simply dispose of the liner after use and fit a new one into the reusable hard cup. The collars provide a tight fit for lids onto the cups. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for waterborne paint materials; or 200 micron filters for traditional solvent-based paint materials. Always reference your paint manufacturer to ensure the recommended filter to strain the material.Cups, collars, lids and liners are Mini sized, allowing technicians to mix graduated measurements of up to 6 fluid oz. (180 mL), ideal for 1-panel repairs. Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Each kit also includes sealing plugs for temporary sealing and protection of unused material.Advantages of the 3M™ PPS™ SystemUnlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™Cup. Then simply mix the paint in the PPS™disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™System. With just these few simple steps, you#39;re ready to start spraying.Your Spray Gun Functions at any Angle, Even Upside DownPPS™allows the painter to spray consistently 90 to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.Clean Up is a Breeze and Uses Less SolventAfter spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer and local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings.Most guns can be cleaned with less than 3 oz. of solvent.A Versatile System that Works with Most Spray GunsSpecifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun.Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M PPS Paint Preparation System
3M Paint Cup
3M PPS Paint Preparation System Tech Tips