3M™ PPS™ Liner 16350, Standard (22 fl oz, 650 mL), 100/Case
100 individual PPS™ Liners only;Designed for use with the 3M™ PPS™ paint preparation system;Fits PPS™ cup sizes for a wide range of jobs;PPS™ is an all-in-one disposable solution for mixing and measuring, filtering, spraying;PPS™ reduces cleaning solvent consumption by up to 70%;Reduces chance of outside contamination, maintains consistent material transfer and reduces paint consumption;Reduces prep and clean-up time by as much as 50%;System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use;System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100225408
-
3M ID60455110100
-
Product Formal Name3M™ PPS™ Liner 16350, Standard (22 fl oz, 650 mL), 100/Case
-
BrandPPS
-
Case UnitCase of 1
-
Unit of MeasureCase(s)
-
Estimated Lead Time2
-
Inventory Status CodeS
-
Country of OriginPanama
-
Return PolicyNo Return
-
Box Length (in)15.5
-
Box Width (in)9.9
-
Box Height (in)9.8
- Bullets
-
Bullet 1- 100 individual PPS™ Liners only
- Designed for use with the 3M™ PPS™ paint preparation system
- Fits PPS™ cup sizes for a wide range of jobs
- PPS™ is an all-in-one disposable solution for mixing and measuring, filtering, spraying
- System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
- Reduces chance of outside contamination, maintains consistent material transfer and reduces paint consumption
- PPS™ reduces cleaning solvent consumption by up to 70%
- Reduces prep and clean-up time by as much as 50%
- System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use
-
-
SKU7100225408
Bulk Liners for Added Efficiency with 3M™ PPS™Excellent for stocking PPS™ liners efficiently and cost-effectively, 3M™ PPS™ Liners are available in cases containing 100 liners each for use with the 3M™ PPS™ paint preparation system.Liners are sized specifically for the range of 3M™ PPS™ hard cups, allowing technicians to mix to 28 fluid oz (850 mL). Liner sizes include:3M™ PPS™ Mini – for use with 6 fluid oz (200mL) PPS™ Series 2.0 Cups ideal for spot and 1-panel repairs 3M™ PPS™ Midi Liners – for use with 13.5 fluid oz (400mL) PPS™ Series 2.0 Cups, great for 2-panel repairs3M™ PPS™ Standard and Large Liners – for use with 22 fluid oz (650mL) and 28 fluid oz (850mL) PPS™ Series 2.0 Cups, excellent for 3-panel and 4-panel repairsNext Generation of the 3M™ PPS™ Paint Preparation SystemThe 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings. Cleanest Disposable Cup System Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.Reduce Material Waste by Mixing in the Cup3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.Improved Fluid Flow for More Consistent Paint ApplicationOur 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.More Confidence in the Connection to Your GunA new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.A System for Both Solvent-Based and Waterborne ProductsEvery lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.Use the Right Size Cup for Every RepairOur PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
