3M™ File Belt Sander Contact Wheel Replacement, 33583, 10 mm (3/8 in), 10 kits per case

3M™ File Belt Sander Contact Wheel Replacements contains everything you need to easily replace the contact wheel on your 3M™ File Belt Sander and help keep it operating at peak performance. Each contact wheel replacement kit contains a durable contact wheel and an installation screw. The contact wheel and the screw are designed specifically for 3M™ File Belt Sanders (PN 33573 and 33575).
Price: $266.02

(Case of 10 Kit)

  • $266.02
  • Case of 10 - $266.02
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      0.23 lbs
    • SKU
      7100132678
    • UPC/ISBN
      00051131335837
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100132678
  • 3M ID
    60455088934
  • UPC
    00-51131-33583-7
  • Product Formal Name
    3M™ File Belt Sander Contact Wheel Replacement, 33583, 10 mm (3/8 in), 10 kits per case
  • Case Unit
    Case of 10
  • Unit of Measure
    Kit
  • Product ID
    33583
  • Part Number
    33583
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    Taiwan
  • Return Policy
    No Return
  • Box Length (in)
    6.7
  • Box Width (in)
    2.4
  • Box Height (in)
    2.4
  • Bullets
    • Bullet 1
      - Designed specifically for 3M™ File Belt Sanders (PN 33573 and 33575) and 3M™ Cubitron™ II Abrasive Belts
      - Replace just the contact wheel, not the entire contact arm assembly
      - Rubber contact wheel is flexible to help prolong abrasive belt life
      - Keeps file belt sander and abrasive belts operating smoothly at peak performance
      - Kit contains durable contact wheel and installation screw
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8467990190
    • UNSPSC Code
      31191600
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      186640
    • NMFC Class
      085.0
    • NMFC Sub
      02
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100132678
  • UPC/ISBN
    00051131335837

Replace Just the Contact Wheel, Not the Entire Contact Arm AssemblyKeeping your 3M™ File Belt Sander (PN 33573 and 33575) operating at peak performance becomes faster and easier with our 3M™ File Belt Sander Contact Wheel Replacements. This convenient kit includes a durable rubber contact wheel and the screw needed to quickly install it into the end of the contact arm. Instead of replacing the contact arm assembly - or the entire tool - you can simply remove the old contact wheel and screw the new one into place.Designed specifically for your 3M™ File Belt Sander, the contact wheel keeps the abrasive belt in precise contact with the substrate, and is critical for smooth and effective operation of the sander. The rubber contact wheel is designed to add flexibility and exert less pressure on the abrasive during use, helping to lengthen the life of the abrasive belt.About the 3M™ File Belt SanderFeaturing a lightweight design and a narrow profile, the 3M™ File Belt Sander is ideal for automotive work and is especially suitable for sanding or grinding in tight areas, such as between door panels or along sharp contours. It provides the power and maneuverability you need for a range of jobs including spot weld and hem flange removal; surface prep; urethane, seam sealer and gasket removal and weld clean-up. In many cases, the belt sander can replace a traditional spot weld drill.This file belt tool is designed for use with 3M™ Cubitron™ II Abrasive Belts, created for performance grinding and long abrasive life. It features a replaceable rubber contact wheel that is designed to provide added flexibility and exert less pressure on the abrasive during use, further lengthening the life of the abrasive belt.About Cubitron™ II Abrasives3M™ Cubitron™ II abrasive products have raised the bar for high-performing abrasives. Engineers started with 3M™ Ceramic Abrasive Grain and used technology to electrostatically orient each triangular structure on the backing to form sharp peaks and maximize cutting potential. These peaks act like individual cutting tools that slice through metal, and continuously shelf-sharpen as the points break off, ensuring extended high performance in heavy-duty production applications. The grains wear evenly and provide extra-long life and consistency with less grinding pressure. The result is that Cubitron™ II products out-cut and outlast every conventional ceramic industrial abrasive product on the market, maximizing productivity and minimizing belt stress and operator fatigue.Better Science for Better Sanding from 3MOur 3M™ File Belt Sander Contact Wheel Replacements is part of a complete portfolio of abrasives and tools specifically designed for auto repair. Designed specifically for the 3M™ File Belt Sander, it is an excellent example of how 3M brings out the best in automotive collision repair projects: Science. Applied to Life.™

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought

Customers who viewed this product bought