3M™ Cylinder Adhesive Hose Swivel, 1/case
Our 3M™ Cylinder Adhesive Applicators are the standard output device for use with most of our cylinder spray adhesive products and is recommended where normal output rates are desired. We combine durable, all metal construction, a balanced design and comfortable grip to provide effective control during operation.
This is for the swivel used with a hose. The listing is not for the hose.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000121610
-
3M ID62988079489
-
UPC00-48011-61992-2
-
Product Formal Name3M™ Cylinder Adhesive Hose Swivel, 1/case
-
Brand-old3M
-
Case UnitCase of 1
-
Unit of MeasureEach
-
Product IDPARTS
-
Estimated Lead Time2
-
Inventory Status CodeN
-
Country of OriginChina
-
Product FormAccessory
-
IndustriesConstruction
-
Application MethodSpray
-
Return PolicyNo Return
-
Box Length (in)4.4
-
Box Width (in)4.4
-
Box Height (in)4.7
- Bullets
-
Bullet 1- Spray gun dispenses adhesive in a controlled pattern
- Trigger guard prevents accidental discharge of adhesive and adjusts output
- Easy attachment and removal with an adjustable wrench
- Includes 3M™ Cylinder Adhesive Spray Tip
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8424909080
-
UNSPSC Code27000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item186640
-
NMFC Class085.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000121610
-
UPC/ISBN00048011619927
Provides Optimal Spray Patterns and Coverage Control3M™ Cylinder Adhesive Applicators can be adjusted to various spray patterns to provide uniform coverage and consistent drying times.A convenient hook molded into the top of each applicator provides easy storage and allows it to be hung briefly during use, as needed.Recommended ApplicationsStandard applicator for 3M cylinder spray adhesivesSpray Tip IncludedOur standard Applicators come with our 3M™ Cylinder Adhesive 9501 Spray Tip, which offers precise control over large areas to maximize adhesive application. Additionally, we have the 3M™ Cylinder Adhesive Applicator-High Output (for use with 3M™ HoldFast 70 Cylinder Spray Adhesive) as well as the 3M™ Cylinder Adhesive Applicator H-Reduced Output (for use with 3M™ Hi-Strength Postforming Cylinder Spray Adhesive 94CA and 3M™ Hi-Strength 94 ET Cylinder Spray Adhesive). In order to select which 3M cylinder spray applicator is the best option for you, please contact a specialist at 1-800-362-3550.
This is for the swivel used with a hose. The listing is not for the hose.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
