Scotch® Thread Sealant and Lubricant 48, 1/4" x 260" in box
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000142693
-
3M ID80012047108
-
UPC00-54007-06192-2
-
Product Formal NameScotch® Thread Sealant and Lubricant 48, 1/4" x 260" in box
-
Brand-oldScotch
-
BrandScotch
-
Case UnitCase of 12
-
Unit of MeasureRoll
-
Product ID48
-
Estimated Lead Time2
-
Size1/4 in x 260 in
-
Size Metric260 Inch x 6.6 m
-
ColorWhite
-
Inventory Status CodeN
-
Data Sheethttp://multimedia.3m.com/mws/media/133686O
-
Technical Informationhttps://multimedia.3m.com/mws/media/133686J/scotch-thread-sealant-and-lubricant-48.jpg
-
Country of OriginUSA
-
Backing MaterialPTFE Fluorocarbon Resin
-
Return PolicyNo Return
-
Width1/4 in
-
Length260 in
-
Box Length (in)8
-
Box Width (in)4.3
-
Box Height (in)4.2
- Bullets
-
Bullet 1- Principally used as a pipe thread sealant.
- Rolls on dry, permanently seals joints and at the same time provides lubricant so the joint can be opened with ease at later date
- Stable through a temperature range of -450˚F (-268˚C) to 500˚F (260˚C); the film will fuse at 700˚F (374˚C)
- Non-flammable
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3920992000
-
UNSPSC Code31201500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item156600
-
NMFC Class060.0
-
NMFC Sub11
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000142693
-
UPC/ISBN00054007061922
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.