3M™ Grid Air Sealing Tape 8068-NL, 2 in x 25 yd, 24 rolls per case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time43
-
Manufacturer3M
-
SAP7010336117
-
3M ID70006777125
-
UPC00-76308-98407-6
-
Product Formal Name3M™ Grid Air Sealing Tape 8068-NL, 2 in x 25 yd, 24 rolls per case
-
Case UnitCase of 24
-
Unit of MeasureRoll
-
Product ID8068-NL
-
Estimated Lead Time43
-
Size2 in x 25 yd
-
Inventory Status CodeN
-
Country of OriginUSA
-
Return PolicyNo Return
-
Width2 in
-
Length25 yd
-
Box Length (in)10.9
-
Box Width (in)10.9
-
Box Height (in)13
- Bullets
-
Bullet 1- Reinforced scrim helps strengthen backing and reduce stretch of tape
- Multi-layer elastomeric film backing seals around nails and staples to prevent moisture intrusion
- Aggressive acrylic adhesive bonds to most building materials without the use of any adhesion promoters
- Can be applied at temperatures as low as 0°F (-18°C) and as warm as 176°F (80°C)
- Service temperatures range from -40°F (-40°C) to 240°F (116°C)
- Withstands up to 12 months of UV resistance
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3919102055
-
UNSPSC Code31201500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item157190
-
NMFC Class060.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010336117
-
UPC/ISBN00076308984076
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.