3M™ Ultra High Temperature Double Coated Tape 9077, 500 mm x 100 m, 1 roll per case

3M™ Ultra High Temperature Double Coated Tape 9077 is a 2.0 mil clear double-coated adhesive tape designed for continued adhesion in high-temperature environments up to 500°F/260°C. It features a 2 mil 3M™ Ultra High Temperature Acrylic Adhesive 100HT, excellent for use in FPC attachment and for HSE metals. A 3.6 mil heat-resistant non-woven liner adds stability for die-cutting and converting.
Price: $1535.97

(Case of 1 Roll)

Estimated Lead Time is 198 working days.
  • $1535.97
  • Case of 1 - $1535.97
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      19.6 lbs
    • SKU
      7000091410
    • UPC/ISBN
      00051115631177
  • Industry
    IB
  • Lead Time
    198
  • Manufacturer
    3M
  • SAP
    7000091410
  • 3M ID
    JT270067518
  • UPC
    00-51115-63117-7
  • Product Formal Name
    3M™ Ultra High Temperature Double Coated Tape 9077, 500 mm x 100 m, 1 roll per case
  • Case Unit
    Case of 1
  • Unit of Measure
    Roll
  • Product ID
    9077
  • Estimated Lead Time
    198
  • Size
    19-5/8 in x 328 ft
  • Inventory Status Code
    N
  • Technical Information
    https://multimedia.3m.com/mws/media/1515081J/3m-ultra-high-temperature-double-coated-tape-9077.jpg
  • Country of Origin
    Japan
  • Return Policy
    No Return
  • Width
    19-5/8 in
  • Length
    328 ft
  • Box Length (in)
    21.3
  • Box Width (in)
    9.1
  • Box Height (in)
    9.1
  • Bullets
    • Bullet 1
      - High temperature adhesive and release liner survives short term exposure to 500°F/260°C for lead-free solder reflow
      - Maintains high adhesion strength in high temperatures, excellent for heat-intensive processing
      - Ideal for flexible printed circuit (FPC) attachments and HSE metals
      - High adhesion, excellent holding power and low outgassing
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      4811411000
    • UNSPSC Code
      31201500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      157190
    • NMFC Class
      060.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000091410
  • UPC/ISBN
    00051115631177

High-Temperature Performance, Efficient Processing and ConversionFeaturing 3M™ Ultra High Temperature Acrylic Adhesive 100HT, our 3M™ Ultra High Temperature Double Coated Tape 9077is double-coated adhesive transfer tape designed to withstand high temps and still deliver efficient conversion. The 2 mil pressure-sensitive adhesive can withstand temperatures as high as 540F (280C) for short periods, suitable for a wide range of processing and operating environments including automotive underhood.A 3.6 mil release liner resists temps up to 500F/260C - excellent for lead-free solder reflow processes commonly used for flexible printed circuit (FPC) attachments. The liner also adds dimensional and structural stability during die-cutting and other conversion processes.Recommended ApplicationsPrinted circuit boardsFlexible circuitsAutomotive underhoodHeat sink bondingAbout 3M™ Ultra High Temperature Acrylic Adhesive 100HTOur3M™ Ultra High Temperature Double Coated Tape 9077features 3M™ Ultra High Temperature Acrylic Adhesive 100HT, an acrylic adhesive that withstands up to 540F (280C) short-term heat resistance and 350F (175C) long term temperature tolerance.It delivers much higher adhesion strength at high temperatures than traditional PSA transfer tapes, as well as excellent holding power and low outgassing.What is Double Coated Tape?In general, double coated tape is composed of a paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that is removed at the time of application. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in electronics, automotive, aerospace, general industrial, and fabrication markets.Bringing Better Ideas to the Surface through Science In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.