Enhanced Adhesion in Convenient PacketsFormulated specifically for use with 3M™ Acrylic Foam Tapes, our3M™ Adhesion Promoter 06396promotes a permanent bond with most low surface energy plastic materials commonly used in automotive instrument panel, interior trim and exterior trim parts.It works well with LSE plastics, as well as TPO, PPO, PP, PC, PC and ABS.The liquid primer dries in 30 to 90 seconds for fast and efficient application - once dry, it is ready to accept the attachment tape. The adhesion promoter is incorporated into an easy-to-use sponge inside a notched packet. Technicians simply tear open the top of the packet at the notches to expose the sponge and, using the bottom of the packet as an applicator, apply the fluid to the auto trim or part. Each sponge applicator packet contains .85 oz. (2.5 cc) of adhesion promoter, enough to cover up to 150 square inches. The adhesion promoter can also be cleaned from most surfaces using MEK or acetone solvents.The 3M™ Adhesion Promoter 06396is specifically formulated to be used with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus Tapes for automotive applications.Recommended ApplicationsAutomotive instrument panel and interior trimInjection-molded side body side moldingsAutomotive claddingsFor use with 3M™ Acrylic Foam Tapes and 3M™ Acrylic Plus TapesBetter Science for Better Adhesion from 3MSince 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life - developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations -' and all of it goes into each of our products developed for automotive OEM and collision repair, like 3M™ Adhesion Promoter 06396.