• 0
:

Clear
Clear
Clear all
Standard Abrasives™ Surface Conditioning RC Disc, 845415, 4 in MED, 10/Pac, 100 ea/Case (Case of ...

        Standard Abrasives™ Surface Conditioning RC Disc, 845415, 4 in MED, 10/Pac, 100 ea/Case (Case of 100) SKU 7100015817

        SKU: 7100015817

        Tough Woven Fabric
        Standard Abrasives™ Surface Conditioning Discs provide a more compact structure of non-woven fibers than Buff & Blend products. Our RC disc has a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the disc and allows for extended use on ferrous materials where final finishing is important. This material is great for general use, delivering a solid mix of durability, flexibility, and cut rate.

        Mixed Materials
        Our Standard Abrasives™ Surface Conditioning RC Discs are made of a tough, but flexible nylon mesh that fits any contoured surface. This mesh is also laced with aluminum oxide abrasive. Aluminum oxide discs are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and should be used for applications on ferrous metals and composites. Aluminum oxide discs feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades ranging from Very Fine to Coarse.

        Strong Backing for Better Performance
        For the best results, it is recommended that a Standard Abrasives™ brand holder pad is used. Tests have shown that surface conditioning discs, when used in conjunction with the Standard Abrasives holder pad, have a greater durability and performance rate. These pads also assure that pressure is applied evenly all the way to the edge of the disc.

        Standard Abrasives
        Estimated Lead Time is 10 working days.
        • $362.30
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7100015817
          • Weight
            4.1 lbs
          • Barcode
            00051115357787
          • Dimensions (L x W x H)
            12.4 x 12.4 x 5.7 in
        • Industry
          IB
        • Marketplace Formal Name
          Standard Abrasives™ Surface Conditioning RC Disc, 845415, 4 in MED, 10/Pac, 100 ea/Case (Case of 100) SKU 7100015817
        • Estimated Lead Time
          10
        • Manufacturer
          3M
        • SAP
          7100015817
        • 3M ID
          66000033788
        • UPC
          00051115357787
        • Product Formal Name
          Standard Abrasives™ Surface Conditioning RC Disc, 845415, 4 in MED, 10/Pac, 100 ea/Case (Case of 100) SKU 7100015817
        • Brand
          Standard Abrasives
        • Case Unit
          Case of 100
        • Unit of Measure
          Each
        • Product ID
          RC
        • Grade
          Medium
        • Grit/Micron
          Medium
        • Size
          4 in
        • Diameter
          4 in
        • Inventory Status Code
          N
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Width
          4 in
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805301000
          • UNSPSC Code
            31191500
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            001100
          • NMFC Class
            055.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        The Standard Abrasives™ Surface Conditioning RC Disc combines edge durability and flexibility with high initial and extended cut rate to create a great all-around disc pad for deburring, blending, cleaning and finishing of composites or other soft metals.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.