• 0
:

Clear
Clear
Clear all
Standard Abrasives™ LDW Wheel 850341, 14 in x 1 in x 8 in 8S FIN, 1 ea/Case (Case of 1) SKU 71000...

        Standard Abrasives™ LDW Wheel 850341, 14 in x 1 in x 8 in 8S FIN, 1 ea/Case (Case of 1) SKU 7100016629

        SKU: 7100016629

        Choosing High vs. Low Densities
        Our Standard Abrasives™ Light Deburring Wheel utilizes a fine grade silicon carbide mineral. These wheels vary in density, ranging from 6 to 8. Higher density wheels tend to be more durable and have a longer service life. Lower density wheels indicate softer feel. This lower density enables the wheel to be more flexible and conform to the substrate. Light deburring wheels tend to be less aggressive and finish finer than other convolute wheels.

        Smear-Resistant for A Brighter Finish
        These wheels are convolute wheels, meaning they must be run in one direction as indicated by the arrow on the side of the wheel. The abrasive web, made with resin and silicon carbide mineral, is wound around the wheel's core. The silicon carbide mineral is bonded with a smear-resistant resin that will not smudge or stain the substrate. These attributes contribute to a cleaner, brighter finish on the substrate. Our Light Deburring Wheel is a great starting point for your light blending, polishing, and deburring applications. Consider it a trusted tool for achieving a fine finish on the workpiece.

        Standard Abrasives
        Estimated Lead Time is 13 working days.
        • $183.23
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7100016629
          • Weight
            3.6 lbs
          • Barcode
            00051115370199
          • Dimensions (L x W x H)
            15.5 x 15.5 x 5.7 in
        • Industry
          IB
        • Marketplace Formal Name
          Standard Abrasives™ LDW Wheel 850341, 14 in x 1 in x 8 in 8S FIN, 1 ea/Case (Case of 1) SKU 7100016629
        • Estimated Lead Time
          13
        • Manufacturer
          3M
        • SAP
          7100016629
        • 3M ID
          66000046194
        • UPC
          00051115370199
        • Product Formal Name
          Standard Abrasives™ LDW Wheel 850341, 14 in x 1 in x 8 in 8S FIN, 1 ea/Case (Case of 1) SKU 7100016629
        • Brand
          Standard Abrasives
        • Case Unit
          Case of 1
        • Unit of Measure
          Each
        • Grade
          Fine
        • Grit/Micron
          Fine
        • Size
          14 in x 1 in x 8 in 8
        • Inventory Status Code
          N
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Width
          14 in
        • Length
          1 in
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805301000
          • UNSPSC Code
            31191500
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            001020
          • NMFC Class
            055.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        The Standard Abrasives™ Light Deburring Wheel finishes and deburrs parts with critical tolerances and may be used on automated equipment, straight shaft stationary and portable tools as well as feed-through machines.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.