Standard Abrasives™ A/O Straight Cartridge Roll 722714, 3/4 in x 2 in x 1/8 in, 80, 50 per case

Our Standard Abrasives™ Aluminum Oxide Cartridge Roll is ideal for fast cutting on irregular contours and other hard-to-reach areas on all ferrous metals.

Price: $59.64

(Case of 50 Roll)

Estimated Lead Time is 15 working days.
  • $59.64
  • Case of 50 - $59.64
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.387 lbs
    • SKU
      7010310885
    • UPC/ISBN
      00051115340291
  • Industry
    IB
  • Lead Time
    15
  • Manufacturer
    3M
  • SAP
    7010310885
  • 3M ID
    66000240961
  • UPC
    00-51115-34029-1
  • Product Formal Name
    Standard Abrasives™ A/O Straight Cartridge Roll 722714, 3/4 in x 2 in x 1/8 in, 80, 50 per case
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 50
  • Unit of Measure
    Roll
  • Estimated Lead Time
    15
  • Grit/Micron
    80
  • Size
    3/4 in x 2 in x 1/8 in
  • Inventory Status Code
    N
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8m1O8mxlv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    3/4 in
  • Length
    2 in
  • Box Length (in)
    9.5
  • Box Width (in)
    6.6
  • Box Height (in)
    6.9
  • Bullets
    • Bullet 1
      - Ideal for blending, deburring and polishing on ferrous metals
      - Straight cylindrical shape enables operators to Finish hard-to-reach areas
      - Versatile range of minerals and grades are Designed to meet specific project needs
      - Arbor hole accommodates mandrel tool attachment, so Abrasive May be used with various tools
      - multi-layer, multi-WEAR design enhances Abrasive longevity and helps produce a consistent cut
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805100000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010310885
  • UPC/ISBN
    00051115340291

Recommended ApplicationsThe multi-layered Standard Abrasives™ Aluminum Oxide Cartridge Roll exposes new abrasive cutting points throughout the life of the roll. Combining an aggressive cut with durability makes it great for polishing, edge breaking and removal of machine tool marks or flash. Its small size and shape enable it to blend, deburr and polish inside holes and diameters or on irregular surfaces and contours.The cartridge roll has an arbor hole to accommodate a mandrel tool attachment (sold separately). This mandrel attaches to a rotary tool such as a die grinder or drill and comes in different sizes to fit a variety of cartridge roll sizes. Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves.The Aluminum Oxide Cartridge Rolls come in a variety of sizes and grades, so it can be tailored to meet your project needs.Grades range from 36 to 400, producing a spectrum of finishes, from coarse to fine.It is made with aluminum oxide mineral, which cuts sharp and is friable - fragmenting under heat and pressure to reveal sharp cutting edges as it abrades the surface.The straight roll design is cylindrical, which helps it roll over irregular contours.Benefits of a Multi-Layer DesignThe multi-layer, multi-wear design of Standard Abrasives™ Aluminum Oxide Cartridge Roll keeps it cutting sharp and helps it withstand repeated wear. As top layers wear down over time, underlying layers expose fresh mineral, so you get a consistent cut, part after part.Wrapping multiple layers of the abrasive material around into a roll contributes to its sturdiness and durability. A resin bond securely anchors mineral to the cloth backing - also enhancing the abrasive ,s toughness and strength. The closed-coat construction means mineral grains cover 100 percent of the cloth backing, so you get a smoother, more consistent finish is achieved. Seemingly small, these cartridge rolls conquer big challenges when space gets tight.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.