• 0
:

Clear
Clear
Clear all
Standard Abrasives™ A/O Spiral Band 704731, 3/4 in x 1 in 60, 100 ea/Case (Case of 100) SKU 71000...

        Standard Abrasives™ A/O Spiral Band 704731, 3/4 in x 1 in 60, 100 ea/Case (Case of 100) SKU 7100079638

        SKU: 7100079638

        Recommended Applications
        Standard Abrasives™ Aluminum Oxide Spiral Band is the best product for polishing and blending flat surfaces and contours, because its spiral shape enables it to smoothly roll over these surfaces. The circular band rotates centrifugally as you move it around the workpiece and – given its small size – the abrasive can easily fit inside hard-to-reach areas. Standard Abrasives™ Aluminum Oxide Spiral Band is great for removing parting lines, tiny imperfections and little burrs, which could otherwise be difficult to remove with a larger abrasive disc or wheel.

        Special Features
        The spiral construction on Standard Abrasives™ Aluminum Oxide Spiral Band eliminates shadow marks and chatter. Aluminum oxide mineral cuts sharp but is still friable, fragmenting under heat and pressure to reveal sharp cutting edges, so you get a consistent cut throughout the life of the abrasive. Available in grades 24 to 320 grit, you can choose the right grade for your project, depending how aggressive a scratch you desire. Coarser grades, like 24, are good for heavy stock removal, whereas finer grades, like 320, are good for metal finishing and polishing.

        Tips for Optimal Use
        Standard Abrasives™ Spiral Bands are intended for use with rubber drums. The single ply or "single thickness" abrasive fits snugly around the drum like a glove. Compared to 2- or 3-ply thicknesses, the single ply is a bit more flexible and conformable, which makes it a good match for contoured surfaces. It is important for both the drum and the abrasive to have the same nominal diameter to prevent skipping and bumping.

        Rather than deflecting or skidding over the substrate, the Spiral Band stays in constant contact with the workpiece to swiftly rid the surface of little burrs. The maximum allowable RPM for spiral bands is the same as the maximum RPM of the drum, provided the drum and band have the same nominal diameter. Typically, the rubber drum attaches to portable drills, die grinders, straight shaft and angle grinders. The great news is, the drum requires no extra tools for band changes.

        Removing contaminants from flat and contoured surfaces is smooth – in finish and operation.

        Standard Abrasives
        • $74.71
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7100079638
          • Weight
            3 lbs
          • Barcode
            00051115328886
          • Dimensions (L x W x H)
            6.4 x 6.3 x 6.3 in
        • Industry
          IB
        • Marketplace Formal Name
          Standard Abrasives™ A/O Spiral Band 704731, 3/4 in x 1 in 60, 100 ea/Case (Case of 100) SKU 7100079638
        • Estimated Lead Time
          2
        • Manufacturer
          3M
        • SAP
          7100079638
        • 3M ID
          66000125055
        • UPC
          00051115328886
        • Product Formal Name
          Standard Abrasives™ A/O Spiral Band 704731, 3/4 in x 1 in 60, 100 ea/Case (Case of 100) SKU 7100079638
        • Brand
          Standard Abrasives
        • Case Unit
          Case of 100
        • Unit of Measure
          Each
        • Grit/Micron
          60
        • Size
          3/4 in x 1 in
        • Diameter
          0.75 Inch
        • Color
          Brown
        • Inventory Status Code
          S
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Width
          3/4 in
        • Length
          1 in
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805100000
          • UNSPSC Code
            31191500
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            001060
          • NMFC Class
            175.0
          • NMFC Sub
            04
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        Standard Abrasives™ Aluminum Oxide Spiral Band is a tensile yet strong abrasive – great for light finishing, polishing, blending and deburring on both hard and soft metals.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.