3M™ Stamark™ Low VOC Surface Preparation Adhesive SPA60, Cylinder Spray Adhesive Mini, 26 lbs
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time15
-
Manufacturer3M
-
SAP7000129546
-
3M ID75030187936
-
UPC00-51141-42593-6
-
Product Formal Name3M™ Stamark™ Low VOC Surface Preparation Adhesive SPA60, Cylinder Spray Adhesive Mini, 26 lbs
-
BrandStamark
-
Case UnitOrder of 12 Cases of 1
-
Unit of MeasureEach
-
Product IDSPA60
-
Estimated Lead Time15
-
Inventory Status CodeN
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMY_vPx_1Mv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)12.1
-
Box Width (in)12.1
-
Box Height (in)17.9
- Bullets
-
Bullet 1- 3M™ Stamark™ Surface Preparation Adhesives are used to improve the adhesion of 3M™ Stamark™ Tapes for permanent applications
- Can be applied by roller or spray application
- Enhances the adhesion of Stamark™ Tapes, especially in marginal or difficult application conditions
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506911000;3506915000
-
UNSPSC Code13111200
-
United States Department Of Transportation Ground US DOT, 49 CFRUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, METHYL ACETATE), 2.1
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, METHYL ACETATE), 2.1
-
NMFC Item085890
-
NMFC Class125.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, METHYL ACETATE), 2.1
-
International Maritime OrganizationUN3501, CHEMICAL UNDER PRESSURE, FLAMMABLE, N.O.S., (DIMETHYL ETHER, METHYL ACETATE), 2.1
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.