ScotchBlue™ Painter's Tape Applicator TA3-SB

*Compared to applying 3M paper-backed tapes by hand.;Applies tape in one continuous strip;Circular grip is easy to hold;Felt pad gently glides across surfaces;For use on trim, baseboards, windows and door frames;How to Reload Tape: Twist Applicator to unlock and pull apart to open. Load tape, then close and twist to lock;Pack out: 1 Tape Applicator and 1 Roll/Pack;Plastic rollers secure tape with a tight seal;Roll Size: 1.41 in. x 20 yd.;Tape Application Tips: For great paint results make sure the surface is clean, dry and dust-free so that the tape sticks properly. Next, secure tape and slide along the surface while pressing down with finger to seal as you go. And lastly, let the tape set for about 30 to 60 minutes before painting;Tape Removal Tips: Wait until the paint is dry to the touch before removing the tape. Lift the tape up by slowly pulling it back on itself, then removing at a 45-degree angle;Tilt & sharp blade provides a quick, precise cut;Works with standard 36mm/1.41” width tape rolls
Price: $49.83

(Case of 6 Each)

  • $49.83
  • Case of 6 - $49.83
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3.7 lbs
    • SKU
      7100190160
    • UPC/ISBN
      00638060262245
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100190160
  • 3M ID
    70009107155
  • Product Formal Name
    ScotchBlue™ Painter's Tape Applicator TA3-SB
  • Brand
    ScotchBlue
  • Case Unit
    Case of 6
  • Unit of Measure
    Each
  • Product ID
    TA3-SB
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    China
  • Return Policy
    No Return
  • Box Length (in)
    13.3
  • Box Width (in)
    7.9
  • Box Height (in)
    10.1
  • Bullets
    • Bullet 1
      - Applies tape in one continuous strip
      - For use on trim, baseboards, windows and door frames
      - Circular grip is easy to hold
      - Felt pad gently glides across surfaces
      - Plastic rollers secure tape with a tight seal
      - Tilt & sharp blade provides a quick, precise cut
      - Works with standard 36mm/1.41” width tape rolls
      - Roll Size: 1.41 in. x 20 yd.
      - Pack out: 1 Tape Applicator and 1 Roll/Pack
      - Tape Application Tips: For great paint results make sure the surface is clean, dry and dust-free so that the tape sticks properly. Next, secure tape and slide along the surface while pressing down with finger to seal as you go. And lastly, let the tape set for about 30 to 60 minutes before painting
      - Tape Removal Tips: Wait until the paint is dry to the touch before removing the tape. Lift the tape up by slowly pulling it back on itself, then removing at a 45-degree angle
      - How to Reload Tape: Twist Applicator to unlock and pull apart to open. Load tape, then close and twist to lock
      - *Compared to applying 3M paper-backed tapes by hand.
  • Transportation
    • ECCN Number
      EAR99
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      041870
    • NMFC Class
      070.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
  • SKU
    7100190160
  • UPC/ISBN
    00638060262245

ScotchBlue™ Painter’s Tape Applicator is your new go to tool for faster, easier prep.* There’s a new way to prep with precision! The ScotchBlue™ Painter’s Tape Applicator applies painter’s tape in one continuous strip, with an easy to hold circular grip and a felt pad that gently glides across surfaces. Plastic rollers tightly seal the tape to a variety of surfaces. Great for use on trim, baseboards, windows and door frames. And the sharp blade provides a straight, precise cut.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.