• 0
:

Clear
Clear
Clear all
Scotch-Brite™ Surface Conditioning Disc, SC-DH, A/O Very Fine, 8 in x NH, 25 ea/Case (Case of 25)...

        Scotch-Brite™ Surface Conditioning Disc, SC-DH, A/O Very Fine, 8 in x NH, 25 ea/Case (Case of 25) SKU 7100086107

        SKU: 7100086107
        The open-web material runs cool and resists loading to enable prolonged operation while evenly distributed aluminum oxide abrasives produce a high cut-rate for consistent finishing. Our Scotch-Brite™ Surface Conditioning Disc uses aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. Our Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into nonwoven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
        Scotch-Brite
        • $226.15
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7100086107
          • Weight
            3.075 lbs
          • Dimensions (L x W x H)
            8.6 x 8.5 x 7.6 in
          • Barcode
            00048011043067
        • Industry
          IB
        • Marketplace Formal Name
          Scotch-Brite™ Surface Conditioning Disc, SC-DH, A/O Very Fine, 8 in x NH, 25 ea/Case (Case of 25) SKU 7100086107
        • Lead Time
          2
        • Manufacturer
          3M
        • SAP
          7100086107
        • 3M ID
          61500121175
        • UPC
          00048011043067
        • Product Formal Name
          Scotch-Brite™ Surface Conditioning Disc, SC-DH, A/O Very Fine, 8 in x NH, 25 ea/Case (Case of 25) SKU 7100086107
        • Brand-old
          Scotch-Brite
        • Brand
          Scotch-Brite
        • Case Unit
          Case of 25
        • Unit of Measure
          Each
        • Product ID
          SC-DH
        • Estimated Lead Time
          2
        • Grade
          Very Fine
        • Grit/Micron
          Very Fine
        • Size
          8 in x NH
        • Diameter
          8 in
        • Diameter (Metric)
          203.2 mm
        • Color
          Teal
        • Inventory Status Code
          S
        • Position
          Good
        • Instructions/Manual
          https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xl8_958tZnv70k17zHvu9lxtD7SSSSSS--
        • Country of Origin
          USA
        • Product Form
          Disc
        • Industries
          Aerospace
        • Applications
          Deburring
        • Sub Applications
          Blending
        • Sub Industries
          Metal Fabrication
        • Equipment - Machines
          Random Orbital Sanders
        • Attachment Type
          Hook and Loop
        • Mineral Type
          Aluminum Oxide
        • Form Type
          Right Angle
        • Max RPM
          6000
        • Return Policy
          No Return
        • Width
          8 in
        • Box Length (in)
          8.6
        • Box Width (in)
          8.5
        • Box Height (in)
          7.6
        • Bullets
          • Bullet 1
            - variety of Abrasive grades and sizes provide an Ideal starting point for cleaning, finishing, blending, and light deburring
            - open web material runs cool and resists loading for prolonged operation
            - Conformable Disc conditions surfaces without gouging, undercutting, or damaging the base material
            - Suitable for metal, composite, plastics, and other materials
            - Hook and loop attachment system Provides fast Disc change-out for multi-step finishing processes
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805301000
          • UNSPSC Code
            31191506
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            124790
          • NMFC Class
            060.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        Scotch-Brite™ Surface Conditioning Disc comes in a wide variety of grades and sizes and is an ideal first-step for cleaning, blending, deburring, and finishing. Durable, nonwoven fiber construction conforms well on irregular or contoured surfaces without undercutting or damaging the base material.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.