Scotch-Brite™ SE Surface Conditioning Belt, SE-BS, A/O Fine, 3 in x 11 in (Case of 1) SKU 7010534419
Constructed of resin-reinforced non-woven fiber, our Scotch-Brite™ SE Surface Conditioning Belts resist loading and avoid under-cutting or gouging of the work piece. We engineered this belt to exhibit high initial and extended rates of cut, while maintaining superior edge durability. All belts may be used for “low stretch” applications.
We also included a woven fabric (scrim) in our conditioning products, which is embedded in the nylon structure to provide additional strength and durability for edge work, deburring and efficient blending of all metal types. The non-woven material combined with abrasive grain is an ideal way to add a great finish or remove burrs. Trust Scotch-Brite™ Belts to deliver fantastic finishes.
Scotch-Brite™ SE Surface Conditioning Belt uses course grade aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Belt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal NameScotch-Brite™ SE Surface Conditioning Belt, SE-BS, A/O Fine, 3 in x 11 in (Case of 1) SKU 7010534419
- Lead Time70
- Manufacturer3M
- SAP7010534419
- 3M IDCY998622112
- UPC00638060712085
- Product Formal NameScotch-Brite™ SE Surface Conditioning Belt, SE-BS, A/O Fine, 3 in x 11 in (Case of 1) SKU 7010534419
- BrandScotch-Brite
- Case UnitCase of 1
- Unit of MeasureEach
- Product IDSE-BS
- Estimated Lead Time70
- GradeFine
- Grit/MicronFine
- Size3 in x 11 in
- ColorGreen
- Inventory Status CodeN
- Country of OriginUSA
- Return PolicyNo Return
- Width3 in
- Length11 in
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6805301000
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.