• 0
:

Clear
Clear
Clear all
Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Medium, 6 in x 4 in x 1 in, 1 ea/Case (C...

        Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Medium, 6 in x 4 in x 1 in, 1 ea/Case (Case of 1) SKU 7100079996

        SKU: 7100079996
        Our Scotch-Brite™ Multi-Finishing Wheel is ideal for producing #3 or #4 finishes on stainless steel and other metals on curved, contoured, and flat surfaces. The Multi-Finishing Wheel runs cool and resists loading due to its open-web construction, reducing the risk of part discoloration and warping while extending the life of the wheel. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive. Our Scotch-Brite™ Multi-Finishing Wheel uses silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
        Scotch-Brite
        • $176.47
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7100079996
          • Weight
            3 lbs
          • Dimensions (L x W x H)
            7 x 7 x 5.2 in
          • Barcode
            00048011133584
        • Industry
          IB
        • Marketplace Formal Name
          Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Medium, 6 in x 4 in x 1 in, 1 ea/Case (Case of 1) SKU 7100079996
        • Lead Time
          2
        • Manufacturer
          3M
        • SAP
          7100079996
        • 3M ID
          61500053659
        • UPC
          00048011133584
        • Product Formal Name
          Scotch-Brite™ Multi-Finishing Convolute Wheel, MU-WL, 2S Medium, 6 in x 4 in x 1 in, 1 ea/Case (Case of 1) SKU 7100079996
        • Brand-old
          Scotch-Brite
        • Brand
          Scotch-Brite
        • Case Unit
          Case of 1
        • Unit of Measure
          Each
        • Product ID
          MU-WL
        • Estimated Lead Time
          2
        • Grade
          Medium
        • Grit/Micron
          Medium
        • Size
          6 in x 4 in x 1 in
        • Diameter
          6 Inch
        • Diameter (Metric)
          152.4 mm
        • Color
          Gray
        • Inventory Status Code
          S
        • Position
          Better
        • Instructions/Manual
          https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4Y_1NxtGOv70k17zHvu9lxtD7SSSSSS--
        • Country of Origin
          USA
        • Product Form
          Wheel
        • Industries
          Metalworking
        • Applications
          Finishing
        • Sub Applications
          Blending
        • Sub Industries
          Builders Hardware
        • For Use On
          Aluminum
        • Equipment - Machines
          Inline Sanders
        • Attachment Type
          Center Hole
        • Mineral Type
          Silicon Carbide
        • Max RPM
          6000
        • Return Policy
          No Return
        • Width
          6 in
        • Length
          4 in
        • Box Length (in)
          7
        • Box Width (in)
          7
        • Box Height (in)
          5.2
        • Bullets
          • Bullet 1
            - Provides uniform grain for final finishing on stainless steel, ferrous, and Non-ferrous metals
            - highly Conformable for consistent finishing on Contoured, curved and other surfaces
            - moderate aggressiveness and lighter density provide controlled WEAR for consistent results over the life of the wheel
            - convolute construction Provides a Balanced, smooth running wheel throughout Product life
            - open, Non-woven web runs cool and lessens impact on heat-sensitive materials
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805301000
          • UNSPSC Code
            31191600
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            001020
          • NMFC Class
            055.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.