• 0
:

Clear
Clear
Clear all
Scotch-Brite™ Metal Finishing Convolute Wheel, MF-WL, 5A Medium, 12 in x 24 in x 5 in, 1 ea/Case ...

        Scotch-Brite™ Metal Finishing Convolute Wheel, MF-WL, 5A Medium, 12 in x 24 in x 5 in, 1 ea/Case (Case of 1) SKU 7100080160

        SKU: 7100080160
        On softer metals like aluminum, copper, and brass, our Scotch-Brite™ Metal Finishing Wheels are used to blend out minor surface imperfections and handling marks while providing the desired decorative finish on products such as builders hardware, and plumbing fixtures. Typically used on stationary machinery, the wheels are available in diameters of 6 to 16 inches and widths of 1/2 inch and greater. This highly conformable wheel is convolutely wound on a core to run smoothly and help create professional finishing results. Available in grade CRS and MED. Our Scotch-Brite™ Metal Finishing Wheel uses aluminum oxide abrasive. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
        Scotch-Brite
        Estimated Lead Time is 8 working days.
        • $4132.08
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7100080160
          • Weight
            40 lbs
          • Barcode
            00048011929286
          • Dimensions (L x W x H)
            12.4 x 12.3 x 25.7 in
        • Industry
          IB
        • Marketplace Formal Name
          Scotch-Brite™ Metal Finishing Convolute Wheel, MF-WL, 5A Medium, 12 in x 24 in x 5 in, 1 ea/Case (Case of 1) SKU 7100080160
        • Estimated Lead Time
          8
        • Manufacturer
          3M
        • SAP
          7100080160
        • 3M ID
          61500158722
        • UPC
          00048011929286
        • Product Formal Name
          Scotch-Brite™ Metal Finishing Convolute Wheel, MF-WL, 5A Medium, 12 in x 24 in x 5 in, 1 ea/Case (Case of 1) SKU 7100080160
        • Brand
          Scotch-Brite
        • Case Unit
          Case of 1
        • Unit of Measure
          Each
        • Product ID
          MF-WL
        • Grade
          Medium
        • Grit/Micron
          Medium
        • Size
          12 in x 24 in x 5 in
        • Color
          Maroon
        • Inventory Status Code
          N
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Width
          12 in
        • Length
          24 in
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805301000
          • UNSPSC Code
            31191600
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            001020
          • NMFC Class
            055.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        Scotch-Brite™ Metal Finishing Wheel combines conformability with consistent abrasive cutting action to provide uniform brushed stainless and satin finishes. The Metal Finishing Wheel is also used effectively to blend and match #3 or #4 mill finishes on stainless steel and to create brushed or satin finishes on items such as cutlery, appliance trim, builders hardware, and plumbing fixtures.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.