Scotch-Brite™ Light Grinding and Blending Disc, GB-DH, Heavy Duty A/O Coarse, Config

Scotch-Brite™ Light Grinding and Blending Disc uses a ceramic abrasive grain blend to achieve a high cut-rate for optimal weld grinding and blending in mild-steel applications. In these instances, Light Grinding and Blending discs are designed to effectively blend and refine a grade 36 scratch or finer.
Estimated Lead Time is 13 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100013099
    • UPC/ISBN
      00048011602981
  • Industry
    IB
  • Lead Time
    13
  • Manufacturer
    3M
  • SAP
    7100013099
  • 3M ID
    61000046096
  • Product Formal Name
    Scotch-Brite™ Light Grinding and Blending Disc, GB-DH, Heavy Duty A/O
    Coarse, Config
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    13
  • Grit/Micron
    Coarse
  • Size
    Configurable
  • Diameter
    Configurable
  • Color
    Pink
  • Inventory Status Code
    Configurable
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxmx4YtBOv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Disc
  • Return Policy
    No Return
  • Width
    Configurable
  • Length
    Configurable
  • Bullets
    • Bullet 1
      - Grinds and blends in a single step
      - 3M™ ceramic aluminum oxide abrasives cut fast and consistent over the life of the disc
      - Durable construction resists edge wear
      - Scotch-Brite™ material won’t melt on hot welds, allowing blending without waiting
      - Hook and Loop attachment and removal allows fast disc change-out for multi-step finishing processes
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100013099
  • UPC/ISBN
    00048011602981

Additionally, Light Grinding and Blending discs can often single-handedly prepare surfaces for painting, where a 3 mil or greater paint thickness is being applied, without adding a final dual-action sanding step.Our 3M™ ceramic aluminum oxide abrasive blend is a ceramic mineral designed using one of our proprietary processes to enhance toughness and hardness of the grain for a higher level performance. 3M ceramic aluminum oxide abrasive is engineered to fracture frequently and surpasses aluminum oxide abrasives in both cut-rate and durability. Perfect for moderate to heavy stock removal as well as finishing, ceramic abrasives are built to cut fast and handle intense heat and stress applications.Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.We offer a complete line of hook-and-loop style 3M™ Hookit™ discs for work spaces where adhesive backed discs may become contaminated by dust, dirt, or flying debris.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M 2 Step Prep For Paint