• 0
:

Clear
Clear
Clear all
Scotch-Brite™ Light Deburring Wheel, LD-WL, 7S Fine, 6 in x 2 in x 1 in, 2 ea/Case (Case of 2) SK...

        Scotch-Brite™ Light Deburring Wheel, LD-WL, 7S Fine, 6 in x 2 in x 1 in, 2 ea/Case (Case of 2) SKU 7100095035

        SKU: 7100095035
        Our Scotch-Brite™ Light Deburring Wheel is uniquely suited to applications where a moderate degree of conformability and density are needed to maintain critical tolerances while providing a fine polished finish. A unique resin system helps minimize smearing and reduces heat build-up. The Light Deburring Wheel resists loading due to its nonwoven web construction. We did this to reduce the risk of part discoloration and warping while extending the life of the wheel. The Light Deburring Wheel is available in fine grade abrasive. Our Scotch-Brite™ Light Deburring Wheel uses fine grade silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into nonwoven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We made this wheel with an open-web material is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
        Scotch-Brite
        • $315.16
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7100095035
          • Weight
            3 lbs
          • Dimensions (L x W x H)
            7 x 7 x 5.2 in
          • Barcode
            00048011016641
        • Industry
          IB
        • Marketplace Formal Name
          Scotch-Brite™ Light Deburring Wheel, LD-WL, 7S Fine, 6 in x 2 in x 1 in, 2 ea/Case (Case of 2) SKU 7100095035
        • Lead Time
          2
        • Manufacturer
          3M
        • SAP
          7100095035
        • 3M ID
          61500126323
        • UPC
          00048011016641
        • Product Formal Name
          Scotch-Brite™ Light Deburring Wheel, LD-WL, 7S Fine, 6 in x 2 in x 1 in, 2 ea/Case (Case of 2) SKU 7100095035
        • Brand-old
          Scotch-Brite
        • Brand
          Scotch-Brite
        • Case Unit
          Case of 2
        • Unit of Measure
          Each
        • Product ID
          LD-WL
        • Estimated Lead Time
          2
        • Grade
          Fine
        • Grit/Micron
          Fine
        • Size
          6 in x 2 in x 1 in
        • Diameter
          6 Inch
        • Diameter (Metric)
          152.4 mm
        • Color
          Gray
        • Inventory Status Code
          S
        • Position
          Good
        • Instructions/Manual
          https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82voxmZov70k17zHvu9lxtD7SSSSSS--
        • Country of Origin
          USA
        • Product Form
          Wheel
        • Industries
          Marine
        • Applications
          Deburring
        • Sub Industries
          Builders Hardware
        • Equipment - Machines
          Manual Backstand
        • Attachment Type
          Center Hole
        • Mineral Type
          Silicon Carbide
        • Form Type
          Convolute/Deburring
        • Max RPM
          6000
        • Return Policy
          No Return
        • Width
          6 in
        • Length
          2 in
        • Box Length (in)
          7
        • Box Width (in)
          7
        • Box Height (in)
          5.2
        • Bullets
          • Bullet 1
            Provides a clean and economical system for removing fine burrs, yet resulting in a polished finish
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805301000
          • UNSPSC Code
            31191600
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            001020
          • NMFC Class
            055.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        Scotch-Brite™ Light Deburring Wheel is a smooth running, convolute-constructed wheel that provides a clean system for light deburring, polishing, and finishing. This wheel is made with soft construction and smooth operation to require less effort by the operator than a harder wheel.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.