Scotch-Brite™ Light Deburring Wheel, LD-WL, 7S Fine, 6 in x 1 in x 1 in, 3 per case

Scotch-Brite™ Light Deburring Wheel is a smooth running, convolute-constructed wheel that provides a clean system for light deburring, polishing, and finishing. We made this wheel with Soft construction and smooth operation to require less effort by the operator than a harder wheel.

Price: $242.18

(Case of 3 Each)

  • $242.18
  • Case of 3 - $242.18
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.203 lbs
    • SKU
      7000000730
    • UPC/ISBN
      00048011016610
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000000730
  • 3M ID
    61500126315
  • UPC
    00-48011-01661-0
  • Product Formal Name
    Scotch-Brite™ Light Deburring Wheel, LD-WL, 7S Fine, 6 in x 1 in x 1 in, 3 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 3
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Grade
    FIN
  • Grit/Micron
    Fine
  • Size
    6 in x 1 in x 1 in
  • Diameter
    6 Inch
  • Diameter (Metric)
    152.4 mm
  • Color
    Gray
  • Color-old
    Gray
  • Inventory Status Code
    S
  • Position
    Good
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82voxmZov70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Wheel
  • Industries
    Marine
  • Application Category
    Blending/Deburring
  • Applications
    Deburring
  • Primary Application
    Metalworking
  • Sub Industries
    Builders Hardware
  • For Use On
    All Metals
  • Equipment - Machines
    Manual Backstand
  • Attachment Type
    Center Hole
  • Mineral Type
    Silicon Carbide
  • Form Type
    Convolute/Deburring
  • Max RPM
    6000 RPM
  • Return Policy
    No Return
  • Width
    6 in
  • Length
    1 in
  • Box Length (in)
    6.8
  • Box Width (in)
    6.8
  • Box Height (in)
    4.3
  • Bullets
    • Bullet 1
      - Provides a clean and economical system for removing fine burrs, yet resulting in a polished Finish
      - conformability offers consistent finishing while keeping fresh Abrasive mineral continuously exposed
      - Non-woven web runs cool and lessens impact on heat-sensitive materials
      - unique Resin system produces less smearing, reducing clean and prep time
      - multi-purpose wheel cleans, finishes, blends, deburrs, and polishes all types of metals, composites and glass
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191600
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001020
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000000730
  • UPC/ISBN
    00048011016610

Our Scotch-Brite™Light Deburring Wheel is uniquely suited to applications where a moderate degree of conformability and density are needed to maintain critical tolerances while providing a fine polished finish. A unique resin system helps minimize smearing and reduces heat build-up. The Light Deburring Wheel runs cool and resists loading due to its non-woven web construction. We did this to reduce the risk of part discoloration and warping while extending the life of the wheel. The Light Deburring Wheel is available in fine grade abrasive.Our Scotch-Brite™ Light Deburring Wheel uses fine grade silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We made this wheel with an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.