Scotch-Brite™ High Strength Flap Brush, HS-FB, 3A Very Fine, 16 in x MISC x 10 in, Config

Our Scotch-Brite™ High Strength Flap Brush is uniquely designed for lighter duty and specialty applications, such as cleaning and finishing.
Estimated Lead Time is 28 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100129722
    • UPC/ISBN
      00076308213114
  • Industry
    IB
  • Lead Time
    28
  • Manufacturer
    3M
  • SAP
    7100129722
  • 3M ID
    61000506982
  • Product Formal Name
    Scotch-Brite™ High Strength Flap Brush, HS-FB, 3A Very Fine, 16 in x
    MISC x 10 in, Config
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Product ID
    HS-FB
  • Estimated Lead Time
    28
  • Grade
    Very Fine
  • Grit/Micron
    Very Fine
  • Size
    16 in x MISC x 10 in
  • Inventory Status Code
    Configurable
  • Country of Origin
    USA
  • Product Form
    Flap Brush
  • Return Policy
    No Return
  • Width
    16 in
  • Length
    MISC
  • Bullets
    • Bullet 1
      - aluminum oxide mineral cuts sharp but Leaves a soft scratch pattern, good for cleaning and finishing
      - Available in a range of grades, densities and sizes so operators can tailor the brush to meet the needs of their unique application
      - especially dense web contributes to Abrasive longevity and durability
      - open web is buoyant and Responsive, minimizing alteration of the workpiece
      - open web has Gaps between fibers, helping reduce loading and clogging of fibers
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      197370
    • NMFC Class
      077.5
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100129722
  • UPC/ISBN
    00076308213114

Anatomy of Flap BrushesWe engineer the Scotch-Brite™ High Strength Flap Brush by taking sections of non-woven material, slit lengthwise, and bonding it to a cylindrical fiberglass core. Among our Scotch-Brite™ Flap and Cleaning Brushes, the High Strength Flap Brush provides a low to medium aggressive cut but has more durable open web.As operators know well, many factors go into pairing the right abrasive with a workpiece. The Scotch-Brite™ High Strength Flap Brush is good for medium-duty cleaning and finishing applications, because it is long-lasting and withstands repeated wear. Yet, it is not so aggressive that it will gouge the workpiece. Instead, the medium grade aluminum oxide mineral cuts softly and leaves a fine scratch pattern.Overall, flap brushes minimize the risk for chatter and marks given their unique construction. Under normal use, flaps rotate centrifugally and make continuous contact with the workpiece. By lapping the surface, the flaps eliminate the residual traces or marks that tend to be left by singular discs or discs ganged on a shaft. The brush may be used with a variety of tools, including a backstand, match and finish sander and a centerless grinder.Operators will get the consistency and responsiveness they've come to expect from Scotch-Brite™ abrasives, but each brush offers unique capabilities based on different grade and density combinations. Our High Strength Flap Brush is available in a range of grades, densities and sizes - so operators can choose the right brush for their specific application.The Many Benefits of Open Web AbrasivesNon-woven technology makes Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral.Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life. Scotch-Brite™ products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Scotch-Brite Match and Finish System