Scotch-Brite™ EXL PRO Deburring Wheel, EP-WL, 10S Fine, 12 in x 1 in x 5 in, 1 per case

The Scotch-Brite™ EXL PRO Deburring Wheel is our highest performing deburring wheel and an ideal fit for off-hand operations. It provides 30-50% longer life than our original EXL wheel, without sacrificing a smooth feel and conformability. Designed for optimal operator comfort, the EXL PRO wheel requires less pressure for a faster cut, making this the wheel of choice for premium performance.

Price: $150.85

(Case of 1 Each)

  • $150.85
  • Case of 1 - $150.85
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3.2 lbs
    • SKU
      7100055440
    • UPC/ISBN
      00051125949026
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100055440
  • 3M ID
    61500311842
  • UPC
    00-51125-94902-6
  • Product Formal Name
    Scotch-Brite™ EXL PRO Deburring Wheel, EP-WL, 10S Fine, 12 in x 1 in x 5 in, 1 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Grade
    FIN
  • Grit/Micron
    Fine
  • Size
    12 in x 1 in x 5 in
  • Diameter
    12 Inch
  • Diameter (Metric)
    304.8 mm
  • Color
    Gray
  • Color-old
    Gray
  • Inventory Status Code
    S
  • Position
    Better
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmx_eO8txNv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Wheel
  • Industries
    Metalworking
  • Applications
    Deburring
  • Sub Applications
    Blending
  • Sub Industries
    Builders Hardware
  • For Use On
    Composites
  • Equipment - Machines
    Centerless Grinders
  • Attachment Type
    Center Hole
  • Mineral Type
    Silicon Carbide
  • Form Type
    Convolute/Deburring
  • Max RPM
    3000 RPM
  • Return Policy
    No Return
  • Width
    12 in
  • Length
    1 in
  • Box Length (in)
    12.4
  • Box Width (in)
    12.4
  • Box Height (in)
    1.6
  • Bullets
    • Bullet 1
      - Wheel design achieves 30-50% longer life than the original EXL wheel
      - Extra tough wheel composition quickly removes burrs and radiuses sharp edges but requires less pressure than standard EXL wheels, without sacrificing finish
      - Convolute construction keeps the wheel running smooth and produces consistent, superior results in off-hand operations
      - Unique resin system minimizes smearing, reducing time spent cleaning surfaces
      - Minimizes heat build up to reduce risk of discoloration and warping on heat-sensitiv
      - Premium wheel is operator-friendly and achieves outstanding performance
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191600
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001020
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100055440
  • UPC/ISBN
    00051125949026

Exceptional Cut and Longevity, with Less PressureOur hard density Scotch-Brite™ EXL PRO Deburring Wheel quickly deburrs stamped or laser cut parts, finishes after belt sanding, and polishes all types of metals, composites and glass. It not only achieves a super fast cut, but leaves a smooth, clean surface without smearing, reducing your need for additional cleanup and preparation. Convolute construction and clean, uniform wear keep the wheel running smoothly and produce a professional finish with less pressure, minimizing fatigue. Our Scotch-Brite PRO material runs cool and keeps fresh abrasives continuously exposed, making it a superior choice on heat sensitive substrates. The toughness of the wheel extends its service life to keep your productivity higher and costs lower.Silicon Carbide for a Fine FinishThe Scotch-Brite™ EXL PRO Deburring Wheel contains silicon carbide abrasive mineral, a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. The Scotch-Brite™ AdvantageNon-woven technology makes Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life. Scotch-Brite products may enhance productivity while reducing the need for cleaning chemicals and wire brushes. From aesthetic finishing to weld blending, deburring and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.