Scotch-Brite™ Cut and Polish Roll, CP-RL, A/O Medium, Config

Scotch-Brite™ Cut and Polish Roll comes with a tough, tight and dense web that allows aggressive blending, cleaning and deburring of metals. Typical applications include metalworking, paint prep, as well as coating and corrosion removal. The web is conformable, flexible and will adapt to unique contours and get into hard-to-reach locations. Tough nylon backing provides durability and long life.
Estimated Lead Time is 17 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100012902
    • UPC/ISBN
      00048011902777
  • Industry
    IB
  • Lead Time
    17
  • Manufacturer
    3M
  • SAP
    7100012902
  • 3M ID
    61000005829
  • Product Formal Name
    Scotch-Brite™ Cut and Polish Roll, CP-RL, A/O Medium, Config
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Roll
  • Estimated Lead Time
    17
  • Grit/Micron
    Medium
  • Size
    Configurable
  • Inventory Status Code
    Configurable
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8tZ4x2BPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Roll
  • Return Policy
    No Return
  • Width
    Configurable
  • Length
    Configurable
  • Bullets
    • Bullet 1
      - tight and dense construction Allows for aggressive blending, cleaning, and polishing on metal surfaces
      - Conformable and flexible for getting into hard-to-reach spots
      - Multiple widths fulfill a variety of surface conditioning needs
      - can be cut to any length to fulfill an extensive variety of tasks by hand or fit to machines
      - Replaces leather or canvas straps for stropping and other bench applications
      - Extremely durable
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31190000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      124790
    • NMFC Class
      060.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100012902
  • UPC/ISBN
    00048011902777

Our Scotch-Brite™ Cut and Polish Roll can be used by hand or machines such as dual pad rubbing machines, oscillating machines. The roll can be cut and fit to our Mini Mandrel #935 to deburr, clean and polish inside diameters. Our Scotch-Brite Cut and Polish Roll is also an effective alternative to leather straps or canvass for stropping and other bench applications. The roll cuts easily, allowing for customized lengths.This tan cut and polish roll uses aluminum oxide abrasive, which is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.Our Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.