• 0
:

Clear
Clear
Clear all
Scotch-Brite™ Combi-S Wheel 80678, 3 in x 1-3/4 in 1/4 in Shank P120 X-weight, 10 ea/Case (Case o...

        Scotch-Brite™ Combi-S Wheel 80678, 3 in x 1-3/4 in 1/4 in Shank P120 X-weight, 10 ea/Case (Case of 10) SKU 7100093994

        SKU: 7100093994

        This wheel is mounted on a 1/4" spindle that supports the wheel for stability and reduces side-loading, helping it remain perpendicular to the work surface.

        Our Scotch-Brite™ Combi-S Wheel is designed for a variety of surface finishing and blending operations on a wide variety of surfaces such as aluminum, stainless steel, copper, and brass. It uses aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use.

        Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

        Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

        Scotch-Brite
        • $421.78
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7100093994
          • Weight
            3 lbs
          • Dimensions (L x W x H)
            9.49 x 6.3 x 4.09 in
          • Barcode
            00051144806782
        • Industry
          IB
        • Marketplace Formal Name
          Scotch-Brite™ Combi-S Wheel 80678, 3 in x 1-3/4 in 1/4 in Shank P120 X-weight, 10 ea/Case (Case of 10) SKU 7100093994
        • Lead Time
          2
        • Manufacturer
          3M
        • SAP
          7100093994
        • 3M ID
          FN510079307
        • UPC
          00051144806782
        • Product Formal Name
          Scotch-Brite™ Combi-S Wheel 80678, 3 in x 1-3/4 in 1/4 in Shank P120 X-weight, 10 ea/Case (Case of 10) SKU 7100093994
        • Brand-old
          Scotch-Brite
        • Brand
          Scotch-Brite
        • Case Unit
          Case of 10
        • Unit of Measure
          Each
        • Estimated Lead Time
          2
        • Grit/Micron
          120
        • Size
          3 in x 1-3/4 in/4
        • Diameter
          3 Inch
        • Diameter (Metric)
          76.2 mm
        • Color
          Maroon
        • Inventory Status Code
          S
        • Position
          Good
        • Instructions/Manual
          https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xlYtZ58tZlv70k17zHvu9lxtD7SSSSSS--
        • Country of Origin
          Poland
        • Product Form
          Wheel
        • Industries
          Marine
        • Applications
          Finishing
        • Sub Applications
          Blending
        • Sub Industries
          Builders Hardware
        • Equipment - Machines
          Die Grinders
        • Attachment Type
          Shaft
        • Mineral Type
          Aluminum Oxide
        • Form Type
          Combi Brush
        • Max RPM
          8000
        • Return Policy
          No Return
        • Width
          3 in
        • Length
          1-3/4 in/4
        • Box Length (in)
          9.49
        • Box Width (in)
          6.3
        • Box Height (in)
          4.09
        • Bullets
          • Bullet 1
            - Alternating flaps of coated and non-woven material cut and finish in a single step
            - 1/4" shaft provides stability to keep the wheel perpendicular to the work surface
            - Flexible web pads cushion each abrasive sheet to produce a professional brushed finish
            - Fits most standard die grinders with a 1/4" collets
            - Choice of grades to provide desired finish (#3/#4)
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805301000
          • UNSPSC Code
            31191500
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            001020
          • NMFC Class
            055.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        Scotch-Brite™ Combi-S Wheel is a unique finishing wheel composed of alternating Scotch-Brite™ non-woven flaps and aluminum oxide coated abrasive sheet. Conformable pads provide a large footprint and cushion the abrasive sheets to create a brushed, decorative finish.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.