Scotch-Brite™ Clean and Strip XT Pro Disc, T27 Quick Change, 4-1/2 in x 5/8 in-11, S XCS, 10 per case

Scotch-Brite™ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web. It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibers are highly conformable, resist chunking and loading, and perform well on the edges of a workpiece.
Price: $123.08

(Case of 10 Each)

  • $123.08
  • Case of 10 - $123.08
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.904 lbs
    • SKU
      7100175252
    • UPC/ISBN
      00638060055748
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100175252
  • 3M ID
    61500303062
  • UPC
    06-38060-05574-8
  • Product Formal Name
    Scotch-Brite™ Clean and Strip XT Pro Disc, T27 Quick Change, 4-1/2 in x 5/8 in-11, S XCS, 10 per case
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 10
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Grit/Micron
    Extra Coarse
  • Size
    4-1/2 in x 5/8-11
  • Diameter
    4-1/2 in
  • Color
    Purple
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Product Form
    Disc
  • Return Policy
    No Return
  • Width
    4-1/2 in
  • Length
    5/8-11, 5/8/2011
  • Box Length (in)
    9.5
  • Box Width (in)
    6.6
  • Box Height (in)
    6.9
  • Bullets
    • Bullet 1
      - quickly removes rust, paint, mill Scale and coatings from metal
      - High-strength Fiber resists chunking and performs well on edges
      - High conformability Provides a larger contact patch for faster removal rates
      - silicon carbide mineral cuts aggressively and Leaves a fine Finish
      - resists loading for consistent cutting action
      - High speed rating, low vibration and low Spark
  • Transportation
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      124790
    • NMFC Class
      060.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100175252
  • UPC/ISBN
    00638060055748

Take Advantage of High ConformabilityWith its reengineered fiber, the Scotch-Brite™ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.Spongy Web, Sharp MineralTo engineer our Scotch-Brite™ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive.The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.Applications Rust removalPaint removalMill scale removalCoating removalAdhesive removalSurface preparation

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought