Scotch-Brite™ Clean and Strip Unitized Block, CS-UB, 7S Extra Coarse, 1/2 in, Config

Operators convert our Scotch-Brite™ Clean and Strip Unitized Block into custom sizes and shapes for their unique applications. It is made for aggressive coating removal, cleaning welds, and removing rust, paint and coatings.
Estimated Lead Time is 28 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100134438
    • UPC/ISBN
      00076308218782
  • Industry
    IB
  • Lead Time
    28
  • Manufacturer
    3M
  • SAP
    7100134438
  • 3M ID
    61000512659
  • Product Formal Name
    Scotch-Brite™ Clean and Strip Unitized Block, CS-UB, 7S Extra Coarse,
    1/2 in, Config
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Product ID
    CS-UB
  • Estimated Lead Time
    28
  • Grade
    Extra Coarse
  • Grit/Micron
    Extra Coarse
  • Size
    1/2 in
  • Inventory Status Code
    Configurable
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8295x_Gmv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Block
  • Return Policy
    No Return
  • Width
    1/2 in
  • Bullets
    • Bullet 1
      - effective in coating and corrosion removal
      - Extra coarse Abrasive and low conformability for strong cutting action without damaging the base material
      - tough, layered, unitized construction
      - resists heat buildup and loading on soft coatings, allowing prolonged operation and consistent coating removal
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191600
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001020
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100134438
  • UPC/ISBN
    00076308218782

Removes Unwanted CoatingsScotch-Brite™ Clean and Strip Unitized Block is uniquely suited for applications like coating removal. Its durable unitized construction won't yield or deflect to surface irregularities, ensuring an ongoing, aggressive cut. While silicon carbide abrasive breaks down faster than aluminum oxide, it produces a brighter finish. It cuts sharply as an abrasive paint remover and also effectively removes scale, rust, surface contaminants, coatings, weld discoloration and splatter.Resists LoadingThe product’s open web helps with the loading that is commonly found in high-production environments and during soft coating removal. Gaps between the nylon fibers permit debris to escape, minimizing loading and premature clogging — which, in turn, prolongs abrasive service life. As the fibers break down, they reveal fresh, sharp mineral, so you get a consistent cut — part after part.Discover the Scotch-Brite™ AdvantageNonwoven technology makes our Scotch-Brite™ abrasives unique. We intersperse abrasive mineral on synthetic fibers using resin — creating an open web construction. Spaces between the fibers permit excess material to escape, so the mineral does not become worn down by debris. It keeps the mineral cutting sharper longer, enhancing cut performance and increasing abrasive service life. The spring-like nature of the fibers works well on contours and responds to subtleties on the surface. Its responsive design effectively removes unwanted burrs, soils and contaminants without ruining the base material, so you get a consistent and uniform finish — part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.