:
from
to
Clear
Clear
Scotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 6 in x 5/8 in, 15 ea/Case (Case of 15) SKU 7100054081
SKU: 7100054081
An Abrasive for High-Production Environments
Scotch-Brite™ Clean and Strip Disc has all the benefits operators have come to expect from Scotch-Brite™ abrasives, including good load resistance and consistent cutting action. In fact, its ability to withstand debris makes it a good match for high-production environments and projects that generate a lot of dust, such as coating and corrosion removal. Scotch-Brite™ Clean and Strip Disc features a standard attachment system and may be connected to a backstand, right angle grinder or die grinder.
Silicon Carbide Mineral Cuts Sharp and Leaves a Bright Finish
Nylon fibers on Scotch-Brite™ Clean and Strip Disc are interspersed with extra-coarse (XCS) silicon carbide mineral. We chose extra-coarse (XCS) mineral, because it cuts more aggressively than minerals in a finer grade. Among synthetic minerals, silicon carbide is one of the sharpest. It breaks down faster than aluminum oxide but leaves a finer finish.
The Many Benefits of Scotch Brite™ Abrasives
As a Scotch-Brite™ product, this disc is engineered with open nylon web, which is why it’s such a great match for cleaning welds, removing rust and stripping paint. The gaps between nylon fibers permit debris to escape. The benefits of this are twofold. First, it enhances the abrasive's ability to withstand loading. Second, because the abrasive does not get clogged with debris as easily, it has prolonged service life. The nylon fibers break down continuously during grinding, revealing fresh mineral for ongoing sharp cutting action and consistent finishes – part after part.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal NameScotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 6 in x 5/8 in, 15 ea/Case (Case of 15) SKU 7100054081
- Lead Time2
- Manufacturer3M
- SAP7100054081
- 3M ID61500120789
- UPC00048011009490
- Product Formal NameScotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 6 in x 5/8 in, 15 ea/Case (Case of 15) SKU 7100054081
- Brand-oldScotch-Brite
- BrandScotch-Brite
- Case UnitCase of 15
- Unit of MeasureEach
- Product IDCS-DC
- Estimated Lead Time2
- GradeExtra Coarse
- Grit/MicronExtra Coarse
- Size6 in x 5/8 in
- Diameter6 in
- Diameter (Metric)152.4 mm
- ColorBlack
- Inventory Status CodeS
- PositionGood
- Instructions/Manualhttps://cdmsweb.3m.com/ingredientcommunication/file/Media/EYXnnjFkTiE=
- Country of OriginUSA
- Product FormDisc
- IndustriesAerospace
- ApplicationsSurface Preparation
- Sub ApplicationsCoating Removal
- Sub IndustriesMetal Fabrication
- Equipment - MachinesManual Backstand
- Mineral TypeSilicon Carbide
- Max RPM4000
- Return PolicyNo Return
- Width6 in
- Length5/8 in
- Box Length (in)7.1
- Box Width (in)7.1
- Box Height (in)9.6
- Bullets
- Bullet 1- removes paint, rust and coatings quickly without compromising the geometry of the workpiece
- Thin width gets into tight corners for complete cleaning, stripping, and surface prep
- Provides greater surface area than wire brushes
- Extra coarse (XCS) grade silicon carbide Provides aggressive cutting and Leaves a Finish than wire brushes
- load and heat resistance offers prolonged operation and consistent finishing results throughout Disc life
- smear resistant, Non-woven web material Provides uniform WEAR over the life of the Disc
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6805301000
- UNSPSC Code31191506
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item124790
- NMFC Class060.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
Scotch-Brite™ Clean and Strip Disc was designed to help operators tackle tough metalworking challenges: think paint prep and coating and corrosion removal. When removing unwanted contaminants and stubborn imperfections – or smoothing a rough surface – it’s a good idea to have a load-resistant, sharp-cutting abrasive on hand.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
