Scotch-Brite™ Clean and Finish Disc, 5 in x NH, A VFN (7447), 100 per case, SPR 18056A

Scotch-Brite™ Clean and Finish Discs combine conformable material and abrasive mineral to effectively blend, clean, and polish surfaces on a wide variety materials such as aluminum, stainless steel, plastics, wood, and fiberglass; producing a clean, consistent finish without undercutting or damaging the base material.

Price: $176.75

(Case of 100 Each)

Estimated Lead Time is 10 working days.
  • $176.75
  • Case of 100 - $176.75
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      5.571 lbs
    • SKU
      7100189666
    • UPC/ISBN
      00638060219645
  • Industry
    IB
  • Lead Time
    10
  • Manufacturer
    3M
  • SAP
    7100189666
  • 3M ID
    61500303823
  • UPC
    06-38060-21964-5
  • Product Formal Name
    Scotch-Brite™ Clean and Finish Disc, 5 in x NH, A VFN (7447), 100 per case, SPR 18056A
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 100
  • Unit of Measure
    Each
  • Estimated Lead Time
    10
  • Grit/Micron
    Very Fine
  • Size
    5 in x NH
  • Diameter
    5 in
  • Inventory Status Code
    N
  • Country of Origin
    USA
  • Product Form
    Disc
  • Return Policy
    No Return
  • Width
    5 in
  • Box Length (in)
    12.6
  • Box Width (in)
    12.5
  • Box Height (in)
    11
  • Bullets
    • Bullet 1
      - Soft abrasive mineral and non-woven web are ideal for cleaning, blending, finishing, and light coating and corrosion removal
      - Conformable pad gets into corners and over contoured surfaces to produce a uniform finish\Open web construction resists loading and rinses clean for repeated use
      - Non-woven 3D structure provides long life and consistent finishes
      - Attaches to random orbital sander (hookit backup pad) for increased cut-rate and cover larger areas
  • Transportation
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      124790
    • NMFC Class
      060.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100189666
  • UPC/ISBN
    00638060219645

Our Scotch-Brite™ Clean and Finish Disc gets into hard-to-reach areas and also work well for finishing, paint preparation, surface blending, and scuffing applications and also works well for contour finishing and lacquer sanding. These discs are flexible, making them effective for getting into hard-to-reach areas and producing uniform finishes. The abrasive mineral effectively blends, finishes, and polishes metals, composites, and advanced surfaces and is an effective abrasive tool for paint prep, scuffing, and light corrosion removal. The disc runs cool and resists loading to continuously provide consistent conditioning properties throughout the life of the product.We manufacture Scotch-Brite™ Clean and Finish Discs with silicon carbide, aluminum oxide, or talc abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Talc is a mild abrasive that can be used achieve a satin finish or with polish to create a high gloss finish in topcoat rubbing applications. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.