3M™ Hydrogen Fluoride Cartridge/Filter 7093C, P100, with Nuisance Level Organic Vapor and Acid Gas Relief*, 60 EA/Case
This cartridge/ filter is NIOSH approved and provides the highest level of protection against oil and non-oil based particles. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000052600
-
3M ID70071401262
-
UPC00-51131-37173-1
-
Product Formal Name3M™ Hydrogen Fluoride Cartridge/Filter 7093C, P100, with Nuisance Level Organic Vapor and Acid Gas Relief*, 60 EA/Case
-
Brand-old3M
-
Case UnitCase of 30
-
Unit of MeasurePacks
-
Inner UnitInner of 6
-
Estimated Lead Time2
-
Grit/Micron100
-
Size Metric3.4 Inch
-
Inventory Status CodeS
-
Technical Informationhttps://multimedia.3m.com/mws/media/431994O/3m-hydrogen-fluoride-cartridge-filter-7093c.pdf&fn=4102_7093C.pdf
-
Country of OriginCanada
-
Return PolicyNo Return
-
Box Length (in)20.2
-
Box Width (in)8.6
-
Box Height (in)6
- Bullets
-
Bullet 1- NIOSH approved and provides the highest level of protection against oil and non-oil based particles
- Bayonet compatibility allows use with many 3M™ half and full facepieces and certain 3M™ Scott™ full facepieces
- Channeled airflow protects filter for enhanced breathability and longer service life
- Unique, spring-loaded filter cover design simplifies negative pressure user seal checks
- Nuisance odor relief for acid gas levels below the Permissible Exposure Level (PEL)
-
- Transportation
-
ECCN Number1A995;COV19;EAR99
-
Harmonized Tariff Schedule Number5911900080
-
UNSPSC Code46182002
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item069100
-
NMFC Class085.0
-
NMFC Sub08
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000052600
-
UPC/ISBN50051131371731
When properly fitted, use in a variety of applications including welding, brazing torch cutting, metal pouring, soldering and exposure to lead, asbestos, cadmium, arsenic, MDA and HF for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. This filter also provides nuisance level* protection against OV and AG exposures. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).*3M recommended for relief against nuisance levels of organic vapor and acid gases. Nuisance level organic vapor and acid gas refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH-approved for organic vapors or acid gases. Do not use for respiratory protection against organic vapors or acid gases (except hydrogen fluoride).
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.