3M™ Speedglas™ FA III SAR V-100 Valve and Speedglas™ Welding Helmet 9100 MP, 27-5702-30iSW, ADF 9100XXi 1EA/CS
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100194535
-
UPC00-51131-27784-7
-
Product Formal Name3M™ Speedglas™ FA III SAR V-100 Valve and Speedglas™ Welding Helmet 9100 MP, 27-5702-30iSW, ADF 9100XXi 1EA/CS
-
BrandSpeedglas
-
Case UnitCase of 1
-
Unit of MeasureEach
-
Product ID9100
-
Estimated Lead Time2
-
Inventory Status CodeS
-
Country of OriginPoland
-
Return PolicyNo Return
-
Box Length (in)21.8
-
Box Width (in)12.6
-
Box Height (in)11.3
- Bullets
-
Bullet 1- With the 3M™ Speedglas™ Welding Helmet 9100 MP (Multi-Protection), we've seamlessly integrated 5 levels of welder protection: head, eye, face, respiratory and hearing into one extraordinarily comfortable and easy-to-use system.
- The hard hat shell is made from heat resistant polycarbonate and meets the ANSI Z89.1-2009 requirements for Type 1 Class G hard hats.
- The 9100 XXi ADF offers Natural Color technology for better control of the weld puddle, greater precision, simplified workflow.
- Switching gears is easy with a helmet that’s up for multiple tasks. With integrated protection offered by 3M PAPR systems, workers can go from welding to grinding without removing, locating or foregoing their PPE.
- The various components of a 3M PAPR system are designed to work together as a single unit – combining respiratory, eye, face and in certain cases head protection that can be customized for almost any work environment.
- Reduced risk of eye injury
- Options for limited facial hair
- A wide (approx. 8in x 4.25in), curved, protective visor with excellent views up, down and peripherally. Meets the requirements of CSA Z94.3 and the high impact requirements of ANSI Z87.1-2010.
- Cools the air up to 50°F (28°C)
- US OSHA Assigned Protection Factor of 25
-
- Transportation
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49CFR 173.185 (c), LITHIUM METAL BATTERIES OR CELLS CONTAINED IN EQUIPMENT
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT RESTRICTED, AS PER 49CFR 173.185 (c), LITHIUM METAL BATTERIES OR CELLS CONTAINED IN EQUIPMENT
-
NMFC Item098660
-
NMFC Class150.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationLITHIUM METAL BATTERIES IN COMPLIANCE WITH SECTION II OF PI 970 - BUTTON CELLS, NO MARK REQUIRED
-
International Maritime OrganizationNOT RESTRICTED,AS PER SP 188, LITHIUM METAL BUTTON CELLS CONTAINED IN EQUIPMENT - NO MARK REQUIRED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100194535
-
UPC/ISBN00051131277847
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.