3M™ Adflo™ Powered Air Purifying Respirator HE System with 3M™ Speedglas™ Welding Helmet 9100 MP, 37-1101-00SW, 1 EA/CASE
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100200514
-
UPC00-76308-94345-5
-
Product Formal Name3M™ Adflo™ Powered Air Purifying Respirator HE System with 3M™ Speedglas™ Welding Helmet 9100 MP, 37-1101-00SW, 1 EA/CASE
-
BrandAdflo, Speedglas
-
Case UnitCase of 1
-
Unit of MeasureCase(s)
-
Product ID9100
-
Estimated Lead Time2
-
Inventory Status CodeN
-
Country of OriginPoland
-
Return PolicyNo Return
-
Box Length (in)21.8
-
Box Width (in)12.6
-
Box Height (in)11.3
- Bullets
-
Bullet 1- Full Adflo Assembly
- 9100 MP
- No ADF Included
- See resources section below
- OV/AG Cartridge Included
- Sold with options of 9100 Series ADFs
- Recommended for construction, design & construction, heavy infrastructure and industrial maintenance industries
- APF 25
- Meets requirements of ANSI Z89.1-2009 -Type 1, Class G, ANSI Z87.1-2010 and NIOSH
-
- Transportation
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49CFR 173.185 (c), LITHIUM ION BATTERIES OR CELLS PACKED WITH EQUIPMENT
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT RESTRICTED, AS PER 49CFR 173.185 (c), LITHIUM ION BATTERIES OR CELLS PACKED WITH EQUIPMENT
-
NMFC Item061700
-
NMFC Class125.0
-
NMFC Sub05
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationLITHIUM ION BATTERIES IN COMPLIANCE WITH SECTION II OF PI 966
-
International Maritime OrganizationNOT RESTRICTED,AS PER SPECIAL PROVISION 188, LITHIUM ION BATTERIES OR CELLS PACKED WITH EQUIPMENT
-
Flashpoint TransportNo Flash Point
-
-
SKU7100200514
-
UPC/ISBN00076308943455
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.